Join 60,000+ competitive exam aspirants
For a jet propulsion unit, ideally the work of compressor and that of gas turbine are
Different
Equal
Not related to each other
Unpredictable
Equal
In an ideal jet propulsion unit (Turbojet), the gas turbine is coupled directly to the air compressor via a common shaft. For the system to maintain a steady-state operation, the power generated by the turbine must exactly equal the power absorbed by the compressor, assuming mechanical efficiency is 100%.
In an ideal jet propulsion unit (Turbojet), the gas turbine is coupled directly to the air compressor via a common shaft. For the system to maintain a steady-state operation, the power generated by the turbine must exactly equal the power absorbed by the compressor, assuming mechanical efficiency is 100%.
WturbineтАЛ=WcompressorтАЛ тАФ Ideal power balance on the shaft
m╦ЩcpтАЛ(T3тАЛтИТT4тАЛ)=m╦ЩcpтАЛ(T2тАЛтИТT1тАЛ) тАФ Energy balance in adiabatic conditions
The Brayton cycle governs the jet engine operation. The compressor increases the pressure of the intake air, which is then heated in the combustion chamber. The expansion of these gases through the turbine extracts work; in an ideal scenario, the turbine extracts just enough energy to drive the compressor, leaving the remaining energy for high-velocity exhaust through the nozzle.
The compressor and turbine are mounted on the same mechanical shaft.
The work interaction is purely internal to the engine core.
In real systems, mechanical losses require the turbine to produce slightly more work than the compressor consumes.
The net output of a turbojet is the kinetic energy of the exhaust gases, not shaft work.
Maintains constant shaft speed (RPM) at steady state
Simplifies mechanical design through direct coupling
Does not account for bearing friction or internal leakages
Idealization fails to reflect actual heat losses in real engines
Turbojet engine design
Gas turbine power cycle analysis
The assumption of equality stems from the energy conservation principle for an isolated mechanical system.
Option A is incorrect because differences in work would lead to acceleration or deceleration of the shaft, violating steady-state design requirements.
B is correct тАФ In an ideal jet propulsion unit, the compressor and turbine are coupled on a single shaft, requiring the work produced by the turbine to equal the work consumed by the compressor.
Always verify if an engine cycle is 'ideal' (no losses) or 'actual' (considering efficiency ╬╖) when evaluating work balance equations in competitive exams.