Join 60,000+ competitive exam aspirants
For a power transformer
Positive sequence impedance is more than negative sequence and zero sequence impedance
Positive, negative and zero sequence impedances are equal
Positive and negative sequence impedances are equal
Positive sequence impedance is less
Positive, negative and zero sequence impedances are equal
In a static device like a power transformer, the magnetic circuit is identical for all three sequence currents (positive, negative, and zero). Therefore, the impedance offered by the transformer winding is independent of the phase sequence of the currents.
In a static device like a power transformer, the magnetic circuit is identical for all three sequence currents (positive, negative, and zero). Therefore, the impedance offered by the transformer winding is independent of the phase sequence of the currents.
Z1тАЛ=Z2тАЛ=Z0тАЛ тАФ Relationship for transformer sequence impedances
VseqтАЛ=ZseqтАЛ├ЧIseqтАЛ тАФ Ohm's law applied to sequence networks
Since the transformer is a static, linear, and balanced electromagnetic device, it does not possess phase-dependent properties like rotating machines (synchronous generators or induction motors). The paths for flux in the core are the same for positive sequence (I1тАЛ), negative sequence (I2тАЛ), and zero sequence (I0тАЛ) components. Consequently, Z1тАЛ=Z2тАЛ=Z0тАЛ holds true, assuming the transformer is Y-Y connected and magnetic circuit saturation is neglected.
Transformers are static devices, unlike rotating machines.
Positive and negative sequence impedances are always equal (Z1тАЛ=Z2тАЛ) for any static passive network.
Zero sequence impedance (Z0тАЛ) for a transformer depends on the winding connection (e.g., Y-Delta) and the neutral grounding path.
The provided options assume a general case or specific configuration where Z0тАЛ is equivalent to the leakage impedance.
Simplifies fault analysis for transformers.
Consistent performance across different phase rotations.
Zero sequence impedance may vary significantly if the grounding configuration changes.
Saturation at high currents can alter impedance values.
Symmetrical fault calculation (3-phase fault).
Unbalanced fault calculation using sequence networks.
Protection relay setting coordination.
In synchronous machines, Z1тАЛюАа=Z2тАЛюАа=Z0тАЛ because of the effect of rotor saliency and physical construction differences.
Option B is the standard theoretical result for idealized transformers in sequence network analysis.
B is correct тАФ Power transformers are static, balanced devices where the sequence impedances (Z1тАЛ,Z2тАЛ,Z0тАЛ) are essentially identical due to the stationary nature of their magnetic circuits.
Always remember that for any static passive circuit, Z1тАЛ always equals Z2тАЛ. Only Z0тАЛ changes based on grounding, making the transformer case unique when Z0тАЛ is also equal.