Join 60,000+ competitive exam aspirants
For P pole machine relation between electrical degrees and mechanical degrees is
╬╕elecтАЛ=P2тАЛ╬╕mechтАЛ
╬╕elecтАЛ=2PтАЛ╬╕mechтАЛ
╬╕elecтАЛ=╬╕mechтАЛ
╬╕elecтАЛ=P4тАЛ╬╕mechтАЛ
╬╕elecтАЛ=2PтАЛ╬╕mechтАЛ
In an electrical machine with P poles, one full mechanical revolution (360┬░ mechanical) corresponds to P/2 complete electrical cycles (360┬░├ЧP/2 electrical degrees). Therefore, the electrical angle is always greater than or equal to the mechanical angle based on the number of poles.
In an electrical machine with P poles, one full mechanical revolution (360┬░ mechanical) corresponds to P/2 complete electrical cycles (360┬░├ЧP/2 electrical degrees). Therefore, the electrical angle is always greater than or equal to the mechanical angle based on the number of poles.
╬╕elecтАЛ=2PтАЛ╬╕mechтАЛ тАФ Relationship between electrical and mechanical angles
f=120PNтАЛ тАФ Frequency formula relating speed and poles
As the rotor moves through space, the magnetic flux encountered by the stator or rotor windings alternates polarity. Since a pair of N and S poles completes one electrical cycle, the number of electrical cycles per revolution is P/2. Multiplying the mechanical displacement by this factor gives the phase displacement in electrical radians or degrees.
For a 2-pole machine (P=2), ╬╕elecтАЛ=╬╕mechтАЛ.
For machines with P > 2, the electrical frequency is higher than the rotational speed frequency.
Mechanical degrees represent physical angular displacement, while electrical degrees represent the phase of the induced EMF.
Allows multi-pole design to maintain frequency at lower speeds
Facilitates efficient design of large synchronous generators
Increases machine size and weight as poles increase
Complexity in winding design increases with pole count
AC Generators (Alternators)
Synchronous Motors
Induction Motors
In a 4-pole machine, one mechanical revolution equates to 2 full electrical cycles (720 electrical degrees).
Option A is incorrect as it inverses the pole factor ratio.
B is correct тАФ The electrical angle is related to the mechanical angle by the factor of pole pairs, which is P/2.
Always verify if the question asks for pole pairs (P/2) or total poles (P); remember that one pair of poles covers 360 electrical degrees per revolution.