Join 60,000+ competitive exam aspirants
For transmission of power over a distance of 500 km, the transmission voltage should be
11 to 22 kV
33 to 66 kV
66 to 110 kV
132 to 220 kV
132 to 220 kV
For long-distance power transmission (typically exceeding 200-250 km), higher transmission voltages are essential to reduce line losses, improve voltage regulation, and increase power transfer capability. A voltage range of 132 kV to 220 kV is standard for distances around 500 km to balance economic feasibility with technical performance.
For long-distance power transmission (typically exceeding 200-250 km), higher transmission voltages are essential to reduce line losses, improve voltage regulation, and increase power transfer capability. A voltage range of 132 kV to 220 kV is standard for distances around 500 km to balance economic feasibility with technical performance.
P=3тАЛVLтАЛILтАЛcos╧Х тАФ Power transmitted in a 3-phase system
PlossтАЛ=3I2R тАФ Copper loss in the transmission line
Transmission efficiency is governed by P=ZV2cos╧ХтАЛ├Чlength┬аfactors. By increasing the voltage (V), the current (I) for a given power load (P=3тАЛVIcos╧Х) decreases significantly. Since power loss is proportional to I2R, a reduction in current leads to a drastic decrease in I2R losses and voltage drop, allowing for efficient long-distance energy transfer.
Transmission voltage is directly proportional to the transmission distance to maintain efficiency.
Higher voltage reduces conductor cross-sectional area requirements for the same power.
For 500 km, voltages below 132 kV result in excessive voltage drops and low efficiency.
Corona loss and insulation costs become significant factors as voltage levels increase further.
Reduced transmission line copper loss (I2R)
Improved voltage regulation at the receiving end
Increased transmission capacity for the same conductor size
Increased insulation cost for towers and transformers
Higher potential for corona discharge and associated radio interference
Requires larger tower structures and increased clearances
Long-distance bulk power transfer between grids
Interconnecting regional power stations
The rule of thumb for transmission voltage estimation is approximately 1 kV per kilometer of line length.
Options A, B, and C provide voltages suitable for distribution or short-distance transmission, which would lead to prohibitive power losses over 500 km.
D is correct тАФ 132 to 220 kV provides the optimal balance of efficiency and economic cost for transmitting power over a distance of 500 km.
Always remember the empirical relation: Transmission voltage (in kV) is approximately equal to the distance (in km) divided by 1.6 to 2 for preliminary estimations.