Join 60,000+ competitive exam aspirants
The most economical voltage for transmission over given power for known distance by overhead transmission system is
0.3 kV/Km
0.6 kV/Km
5 kV/Km
5 kV/Km
0.6 kV/Km
The most economical voltage for an overhead transmission system is determined by balancing the capital cost (conductors, towers, insulators) against the operational cost (energy losses). According to empirical rules, for overhead lines, the transmission voltage is typically selected as approximately 0.6 kV per kilometer of distance to minimize total system cost.
The most economical voltage for an overhead transmission system is determined by balancing the capital cost (conductors, towers, insulators) against the operational cost (energy losses). According to empirical rules, for overhead lines, the transmission voltage is typically selected as approximately 0.6 kV per kilometer of distance to minimize total system cost.
VeconтАЛтЙИ0.61.63├ЧLтАЛ+150PтАЛтАЛ тАФ (Approximate rule of thumb for transmission voltage estimation)
The principle relies on Kelvin's Law, which states that the most economical size of a conductor is one where the annual interest and depreciation on the capital cost are equal to the annual cost of energy lost. As voltage increases, current decreases for a constant power, reducing I2R losses, but the cost of insulation and substations increases. The ratio of 0.6 kV/km provides an empirical balance for standard overhead lines.
Higher transmission voltages reduce transmission line losses (I2R).
Increased voltage requires larger clearances and more expensive insulation.
The 0.6 kV/km rule is a thumb rule used for preliminary design selection.
Actual selection involves detailed techno-economic feasibility studies.
Minimizes total annual cost (fixed + variable)
Reduces conduction loss for fixed power transmission
Optimizes conductor cross-sectional area
High initial investment for very long lines
Corona loss increases at higher voltages
Complexity in substation transformer design
Power system planning
High Voltage AC (HVAC) transmission line design
The rule suggests that for a 100 km line, an approximate voltage of 60 kV would be the starting point for evaluation.
This rule is valid for standard overhead configurations and may vary with the use of HVDC or bundled conductors.
B is correct тАФ The most economical transmission voltage for overhead lines is empirically chosen at approximately 0.6 kV per kilometer.
Always remember that economic voltage is a balance between fixed costs (infrastructure) and running costs (losses); Kelvin's law is the foundational economic theorem for this calculation.