Join 60,000+ competitive exam aspirants
The main reason for using high voltage for long distance power transmission is
Reduction in transmission losses
Reduction in time of transmission
Increase in transmission reliability
None of above
Reduction in transmission losses
High voltage transmission is used primarily to reduce I2R power losses and minimize voltage drop across transmission lines. By increasing the voltage for a given power level, the required line current decreases significantly, leading to higher transmission efficiency and reduced conductor material requirements.
High voltage transmission is used primarily to reduce I2R power losses and minimize voltage drop across transmission lines. By increasing the voltage for a given power level, the required line current decreases significantly, leading to higher transmission efficiency and reduced conductor material requirements.
P=VIcos╧Х тАФ Power delivered in a single-phase system
PlossтАЛ=I2R тАФ Joule heating loss in the transmission conductor
VdropтАЛ=IR тАФ Voltage drop across the transmission line
Power transmitted in a system is given by P=VIcos╧Х. For a constant power, if the voltage V is increased, the current I decreases proportionally. Since the power loss in a line is defined as PlossтАЛ=I2R, reducing the current by a factor k results in a reduction of losses by a factor k2. This allows for smaller conductor cross-sections, saving copper or aluminum costs.
Higher voltage reduces current, which in turn reduces the ohmic (I2R) losses.
Reduction in current allows for smaller conductor diameter, reducing project capital cost.
Transmission efficiency increases as voltage levels rise.
Higher voltage levels also reduce the percentage voltage regulation issues.
Significant reduction in power loss (I2R)
Increased transmission capacity over longer distances
Reduction in volume of conducting material required
Increased cost of insulation (transformers, insulators)
Increased corona loss and radio interference at very high voltages
Requires larger tower structures and clearance distances
Inter-state power grids
Long-distance HVDC and HVAC transmission lines
Transmission lines are usually operated at voltages like 132kV, 220kV, 400kV, or 765kV.
Option B is incorrect because the speed of electricity is near the speed of light, which is independent of the voltage level.
Option C is incorrect because while higher voltage allows for more robust infrastructure, reliability is more dependent on redundant paths (mesh networks) than voltage alone.
A is correct тАФ Using high voltage reduces the current required to transmit a specific amount of power, which minimizes I2R transmission losses.
Always remember that for a fixed load power, current is inversely proportional to voltage; therefore, quadrupling the voltage reduces line losses by a factor of 16.