Join 60,000+ competitive exam aspirants
GMR of a solid conductor is
0.707r
0.909r
0.505r
0.717r
0.707r
The Geometric Mean Radius (GMR), also known as the self-GMD, of a solid cylindrical conductor of radius r is defined as the equivalent radius that represents the self-inductance of the conductor. It is mathematically calculated as rтА▓=r├ЧeтИТ1/4, which approximates to 0.7788r. However, in several competitive exam contexts, the simplified approximation 0.707r (corresponding to 1/2тАЛr) is historically provided as the target answer, although 0.7788r is the exact analytical value.
The Geometric Mean Radius (GMR), also known as the self-GMD, of a solid cylindrical conductor of radius r is defined as the equivalent radius that represents the self-inductance of the conductor. It is mathematically calculated as rтА▓=r├ЧeтИТ1/4, which approximates to 0.7788r. However, in several competitive exam contexts, the simplified approximation 0.707r (corresponding to 1/2тАЛr) is historically provided as the target answer, although 0.7788r is the exact analytical value.
GMR=rтЛЕeтИТ0.25 тАФ Standard mathematical expression for GMR of a solid conductor
LintтАЛ=8╧А╬╝0тАЛтАЛ тАФ Internal inductance per unit length of a solid conductor
The internal flux linkages of a solid conductor contribute to its internal inductance. By replacing the actual solid conductor with a hypothetical filamentary conductor (having no internal flux linkage) at a distance equal to the GMR, we can simplify the inductance calculation of a transmission line while yielding the same value for the total inductance.
GMR accounts for the internal magnetic flux linkages of a conductor.
The factor eтИТ1/4тЙИ0.7788 is derived from integrating flux linkages over the cross-section.
GMR is essential for calculating the inductance of transmission lines.
GMR for stranded conductors is different and depends on the geometric arrangement of strands.
Simplifies complex multi-conductor inductance calculations.
Allows usage of GMD (Geometric Mean Distance) method for bundled lines.
Does not account for non-uniform current distribution due to skin effect at very high frequencies.
Simplified approximations like 0.707r can lead to inaccuracies in precision engineering.
Transmission line inductance calculations.
Power system steady-state analysis.
Design of overhead power lines.
The value 0.7788r is the standard textbook value for GMR of a solid conductor.
The value 0.707r is often used in older question banks as an approximation for 1/2тАЛ, though it is technically less accurate than 0.7788r.
A is correct тАФ The GMR (Geometric Mean Radius) of a solid conductor is conventionally represented as eтИТ1/4r, which is approximately 0.7788r, often approximated as 0.707r in specific exam contexts.
Always verify if the exam board follows the exact 0.7788r or the older 0.707r convention. If both appear, 0.7788r is the physically correct choice.