Join 60,000+ competitive exam aspirants
Skin effect of a conductor will increase when
Diameter decreases
Resistivity decreases
Frequency decreases
All of above
Resistivity decreases
The skin effect is the tendency of an alternating current to become distributed within a conductor such that the current density is largest near the surface. It increases when the skin depth decreases, which is proportional to the square root of the ratio of resistivity to permeability and frequency.
The skin effect is the tendency of an alternating current to become distributed within a conductor such that the current density is largest near the surface. It increases when the skin depth decreases, which is proportional to the square root of the ratio of resistivity to permeability and frequency.
╬┤=╧Аf╬╝╧БтАЛтАЛ тАФ where ╬┤ is the skin depth
RacтАЛ=RdcтАЛ├Ч(1+k) тАФ where RacтАЛ increases with skin effect
As the frequency or conductivity (inverse of resistivity) of the conductor increases, the internal flux linkages increase towards the center of the conductor. This creates higher inductive reactance at the core, forcing the current towards the outer skin to minimize the total impedance path.
Skin effect is independent of the conductor's physical diameter if the material and frequency are fixed, but it is highly dependent on resistivity.
Higher conductivity (lower resistivity) leads to a reduction in skin depth, thereby increasing the skin effect.
Skin effect is negligible at DC and very low frequencies.
Useful in high-frequency applications like induction heating.
Reduces internal interference in specific RF signal transmission scenarios.
Increases the effective resistance of power transmission lines.
Results in higher I2R losses, reducing the efficiency of power delivery.
High-frequency cable design
Induction heating furnaces
High-power transmission line conductors
Skin effect increases with: Higher frequency, higher permeability, and lower resistivity.
Note: The question states 'Resistivity decreases', which increases conductivity and thus increases the skin effect.
B is correct тАФ Lower resistivity increases the conductivity of the material, which reduces the skin depth and enhances the skin effect.
Always remember that skin effect is more pronounced in high-conductivity materials like copper compared to materials with higher resistivity.