Join 60,000+ competitive exam aspirants
The fact that a current density is higher at the surface when compared to center is known as
Skin effect
Corona
Proximity effect
All of above
Skin effect
The skin effect is the tendency of an alternating electric current (AC) to become distributed within a conductor such that the current density is highest near the surface and decreases exponentially towards the center. This occurs because the internal magnetic fields generated by the current induce eddy currents that oppose the main current flow in the interior regions.
The skin effect is the tendency of an alternating electric current (AC) to become distributed within a conductor such that the current density is highest near the surface and decreases exponentially towards the center. This occurs because the internal magnetic fields generated by the current induce eddy currents that oppose the main current flow in the interior regions.
╬┤=2╧Аf╬╝2╧БтАЛтАЛ тАФ Skin depth equation showing dependency on frequency (f) and permeability (╬╝)
RacтАЛ>RdcтАЛ тАФ Resulting increase in effective resistance due to reduced cross-sectional area
As frequency increases, the self-inductance of the inner portions of the conductor is higher than that of the outer portions, leading to a higher inductive reactance at the center. Consequently, the AC follows the path of least impedance, which is the surface layer. The depth at which the current density drops to 1/e (approx 37%) of its surface value is known as the skin depth (╬┤).
Skin effect increases with higher frequency and conductor diameter.
It is independent of the conductor material's geometry but depends on conductivity and permeability.
For DC (f=0), skin effect is zero as current is distributed uniformly.
In high-voltage transmission, bundled conductors are used to mitigate this effect.
Useful in induction heating applications
Acts as a natural shield against external electromagnetic interference
Increases the effective resistance of the conductor
Leads to higher I2R power losses in transmission lines
High-frequency circuit design
Radio frequency (RF) transmission lines
Induction hardening of steel
Corona effect (Option B) is the ionization of air surrounding a conductor due to high electric fields, usually manifesting as a glow and noise.
Proximity effect (Option C) is the non-uniform current distribution caused by the magnetic field of adjacent conductors.
A is correct тАФ The skin effect refers to the non-uniform distribution of current in an AC conductor where density is higher at the surface.
Always remember that skin effect is frequency-dependent; for DC current (f=0), ╬┤тЖТтИЮ, meaning uniform current distribution across the entire cross-section.