Join 60,000+ competitive exam aspirants
High inrush of current during a starting of DC motor can efficiently be restricted to a safer value by increasing the _________________ resistance.
armature circuit
shunt field
both A and B
none of the above
armature circuit
At the instant of starting, a DC motor has zero back EMF (EbтАЛ=0). Connecting the armature directly to the supply results in an extremely high inrush current, which is restricted by inserting an external variable resistance in series with the armature circuit.
At the instant of starting, a DC motor has zero back EMF (EbтАЛ=0). Connecting the armature directly to the supply results in an extremely high inrush current, which is restricted by inserting an external variable resistance in series with the armature circuit.
IaтАЛ=RaтАЛ+RextтАЛVтИТEbтАЛтАЛ тАФ Armature current during starting
EbтАЛ=60AP╬жZNтАЛ тАФ Back EMF of a DC machine
The starting current is given by IaтАЛ=RaтАЛVтИТEbтАЛтАЛ. Since EbтАЛ=0 at starting, IaтАЛ=RaтАЛVтАЛ. Because the internal armature resistance RaтАЛ is very low, this ratio becomes dangerously high. By adding a starter resistance RextтАЛ, the equation becomes IaтАЛ=RaтАЛ+RextтАЛVтАЛ, effectively limiting the current to a safe value.
A DC motor acts as a short circuit at the instant of starting due to the absence of back EMF.
Starter resistance is cut out gradually as the motor gains speed and EbтАЛ builds up.
The 3-point or 4-point starter is standard equipment for shunt and compound motors.
Prevents damage to the armature windings due to excessive heat
Prevents voltage dips in the supply network caused by high current spikes
Increases cost and complexity of the motor control unit
Starter resistance consumes power as heat if left in the circuit
DC Shunt Motors
DC Compound Motors
Option B (shunt field) is incorrect because increasing field resistance would increase the motor speed and reduce the starting torque, but it does not limit the high inrush current in the armature circuit.
The armature circuit handles the full load current, hence requiring a starter.
A is correct тАФ The armature circuit resistance is increased using a starter to limit the surge of current during motor startup.
Always remember that in DC motors, back EMF is proportional to speed (EbтАЛтИЭN); since N=0 at start, EbтАЛ=0, making starters mandatory.