Join 60,000+ competitive exam aspirants
Which of the following DC Motor uses a 4-point starter?
DC shunt motor with field weakening control
DC series motor
DC compound motor
DC shunt motor with armature resistance
DC shunt motor with armature resistance
A 4-point starter is used for a DC shunt motor when field weakening control is employed for speed regulation. The fourth point (L2 or N) provides an independent supply to the shunt field circuit, ensuring that the holding coil (no-volt coil) remains unaffected by changes in the field rheostat setting.
A 4-point starter is used for a DC shunt motor when field weakening control is employed for speed regulation. The fourth point (L2 or N) provides an independent supply to the shunt field circuit, ensuring that the holding coil (no-volt coil) remains unaffected by changes in the field rheostat setting.
IshтАЛ=RshтАЛ+RextтАЛVтАЛ тАФ Shunt field current equation showing dependency on external resistance
TeтАЛтИЭ╬жIaтАЛ тАФ Torque equation representing motor mechanical power
In a 3-point starter, the holding coil is connected in series with the shunt field. When the field rheostat is adjusted to increase speed, the field current decreases, potentially dropping below the threshold required to hold the starter arm in the 'ON' position. The 4-point starter isolates the holding coil from the field circuit by connecting it across the line via a current-limiting resistor, keeping the holding force constant despite speed control variations.
The 4th point (N) connects the holding coil directly across the supply line.
Eliminates the dependency of the holding coil current on the field rheostat.
Essential for wide-range speed control using field flux weakening.
Prevents accidental tripping of the starter handle due to field resistance adjustments.
Allows full range of speed control using field weakening.
Ensures stable holding of the starter handle.
More complex wiring compared to 3-point starter.
Cannot protect against field failure (no field loss protection).
Industrial variable-speed DC drives.
Applications requiring high-speed operation via field weakening.
Option A is typically incorrect because the 4-point starter IS the standard method used for shunt motors with field weakening.
Option B (DC Series Motor) typically uses a 2-point starter due to the high starting current and series field characteristics.
DC shunt motors without speed control use 3-point starters as they are simpler.
D is correct тАФ The 4-point starter is specifically designed to allow field current variation for speed control without causing the holding coil to trip.
Always remember: 2-point for series, 3-point for shunt (fixed speed), 4-point for shunt (variable speed/field weakening).