Join 60,000+ competitive exam aspirants
Hopkinson test is conducted under which of the following condition?
no load
full load
half load
any of the above
full load
The Hopkinson test is a regenerative load test used to determine the efficiency of DC machines by operating them under full load conditions. It requires two identical DC machines coupled mechanically, where one acts as a motor and the other as a generator, effectively circulating power between them.
The Hopkinson test is a regenerative load test used to determine the efficiency of DC machines by operating them under full load conditions. It requires two identical DC machines coupled mechanically, where one acts as a motor and the other as a generator, effectively circulating power between them.
PinтАЛ=PtotallтАЛossesтАЛ тАФ The external power supply only covers the machine losses
╬╖genтАЛ=PoutтАЛ+PlossesgтАЛenтАЛPoutтАЛтАЛ тАФ Efficiency calculation
In this test, the machines are connected in parallel to the supply. The generator drives the motor, and the motor drives the generator, creating a regenerative loop. Because the power required from the external source only compensates for the total losses (iron, copper, and mechanical), the machines can be tested at full load with minimal power consumption from the mains.
It is a back-to-back or regenerative test method.
Requires two identical machines coupled mechanically.
The total power drawn from the source is only equal to the losses of both machines.
Mainly used for large DC machines where loading is expensive.
Requires very little power for full load testing.
Temperature rise and commutation can be observed under actual working conditions.
Requires two identical machines.
Cannot be performed on a single machine.
Difficult to adjust both machines to reach full load simultaneously.
Large DC machines in manufacturing plants.
Factory testing of traction motors.
The Hopkinson test is classified as a regenerative test because energy is recycled back into the system.
Option A (no load) refers to the Swinburne test, which is an indirect method.
B is correct тАФ The Hopkinson test is specifically designed to operate two coupled DC machines at full load by circulating power between them.
Remember: Swinburne test = No load, Hopkinson test = Full load, Retardation test = Stray losses.