Join 60,000+ competitive exam aspirants
How many Fan points can be allowed in one circuit ?
5 points
10 points
15 points
20 points
10 points
According to the Indian Standard (IS) 732 for electrical wiring installations, a single lighting or fan circuit is restricted to a maximum of 10 points per circuit. This limit is imposed to prevent overloading the circuit cables and to ensure manageable maintenance and troubleshooting.
According to the Indian Standard (IS) 732 for electrical wiring installations, a single lighting or fan circuit is restricted to a maximum of 10 points per circuit. This limit is imposed to prevent overloading the circuit cables and to ensure manageable maintenance and troubleshooting.
PmaxтАЛтЙд800┬аW тАФ Total power limit per circuit
NpointsтАЛтЙд10 тАФ Total point count limit per circuit
The principle relies on the thermal capacity of the circuit conductors. By limiting the number of points to 10 and the total connected load to 800 Watts (whichever is reached first), the system ensures that the current flowing through the circuit remains within the safe current-carrying capacity (ampacity) of standard 1.5mm2 copper wiring used in residential branch circuits.
The 10-point rule applies to both light points and fan points within a single sub-circuit.
A circuit is defined as the entire wiring segment protected by a single miniature circuit breaker (MCB).
The 800W load limit must be strictly observed alongside the point limit to prevent overheating.
These standards are crucial for fire safety and compliance with the National Electrical Code of India.
Prevents circuit overload and potential fire hazards
Facilitates easier fault isolation during maintenance
Requires additional wiring runs for large buildings
Increases the number of required MCBs and distribution board space
Residential building wiring
Commercial office lighting circuits
Small-scale industrial lighting distribution
The limit of 10 points is exclusive of socket outlets, which often require separate circuits if they exceed specific load ratings.
Options C and D are incorrect as they exceed the safety threshold defined by the Indian Standard for domestic electrical installations.
B is correct тАФ As per IS 732, a maximum of 10 points is permitted for a single circuit to ensure safety and prevent overloading.
Remember that the 800W rule and the 10-point rule are both mandatory; if a circuit reaches 800W with only 5 points, it is still considered fully loaded.