Join 60,000+ competitive exam aspirants
How many power points can be allowed in one circuit ?
Four
Three
Two
One
Two
According to the Indian Standard (IS) 732 for electrical wiring installations, a power circuit is designed to carry a higher load than a lighting circuit. Specifically, power sub-circuits are restricted to a maximum of two power outlets to ensure the total connected load does not exceed the circuit capacity, which is typically capped at 3000 watts per circuit.
According to the Indian Standard (IS) 732 for electrical wiring installations, a power circuit is designed to carry a higher load than a lighting circuit. Specifically, power sub-circuits are restricted to a maximum of two power outlets to ensure the total connected load does not exceed the circuit capacity, which is typically capped at 3000 watts per circuit.
P=VтЛЕIтЛЕcos╧Х тАФ total power calculation
IcircuitтАЛ=тИСi=1nтАЛIiтАЛтЙдIratedтАЛ тАФ current constraint for nтЙд2
The restriction is based on the Current Capacity of the conductors and the protective devices (MCB). If more than two high-wattage appliances (like geysers or ACs) are connected to a single circuit, the sum of their currents (I=VтЛЕcos╧ХPтАЛ) would likely exceed the rated capacity of the circuit wiring (typically 15A/16A rating for power points), leading to overheating and potential fire hazards.
Maximum of two power points are permitted per sub-circuit.
Power circuits use 15A/16A sockets, whereas lighting circuits use 5A/6A sockets.
The total connected load on a power sub-circuit is limited to 3000 W.
Each sub-circuit must be protected by its own MCB to prevent overloading.
Prevents overheating of cables
Easier maintenance and fault isolation
Ensures voltage stability for heavy loads
Higher installation cost due to more MCBs and wiring
Requires more space in the distribution board (DB)
Air conditioners
Electric geysers and heaters
Induction cooktops
For lighting circuits, the limit is typically 10 points or 800 W per circuit.
Option D (One) is safer but not the maximum allowed per standard practice.
C is correct тАФ As per electrical wiring standards, a maximum of two power outlets are allowed in a single power sub-circuit.
Always remember: Power points use 15A rating and are restricted to 2 per circuit, whereas light/fan points use 5A rating and allow up to 10 points per circuit.