Join 60,000+ competitive exam aspirants
If a circuit breaker does not operate on electrical compound, the probable reason could be
trip latch defective
spring defective
trip circuit open
any of these
any of these
A circuit breaker fails to operate or trip when there is a malfunction in either its mechanical tripping mechanism or its electrical control circuit. Defective trip latches, broken or weak operating springs, or an open circuit in the trip coil path will all prevent the breaker from opening automatically during a fault.
IS/IEC 60947-2, IEC 62271-100 Cl. 6.101
A circuit breaker fails to operate or trip when there is a malfunction in either its mechanical tripping mechanism or its electrical control circuit. Defective trip latches, broken or weak operating springs, or an open circuit in the trip coil path will all prevent the breaker from opening automatically during a fault.
FtripтАЛ=kтЛЕItripтАЛ тАФ Mechanical tripping force generated by the electromagnetic trip coil
EspringтАЛ=21тАЛkx2 тАФ Stored mechanical energy in the opening spring required to pull contacts apart
When a fault occurs, the protective relay closes its contacts, energizing the trip coil via the auxiliary DC supply. Upon energization, the trip coil plunger releases the mechanical trip latch, allowing the stored energy in the charged spring to rapidly pull the main breaker contacts apart. If the trip latch is jammed (mechanical failure), the spring is defective/discharged (mechanical failure), or the trip circuit has a blown fuse/broken wire (electrical failure), the tripping chain fails at that specific link.
Electrical sub-system failure: An open trip circuit (due to burnt trip coil, loose connection, or blown DC fuse) stops current from flowing to actuate the plunger.
Mechanical sub-system failure: A defective trip latch prevents mechanical release even if the trip coil generates full magnetic pull.
Stored energy failure: A defective or uncharged spring cannot accelerate the contacts apart, leading to non-operation or arc restrike.
Trip Circuit Supervision (TCS) relays are continuously used in power systems to monitor the health of the trip coil circuit both in the open and closed states of the breaker.
Option A (trip latch defective) represents a mechanical link failure.
Option B (spring defective) represents an energy storage system failure.
Option C (trip circuit open) represents an electrical signal path failure.
Since any of these individual failures will prevent breaker operation, 'D) any of these' is correct.
D is correct тАФ Failure of any constituent electrical or mechanical component in the tripping chain prevents the circuit breaker from opening.
Always remember that a circuit breaker requires both electrical healthy signals (DC supply, intact trip coil) AND healthy mechanical systems (latches, springs) to clear a fault.