Join 60,000+ competitive exam aspirants
Ionization in a circuit breaker is not facilitated by
material of contacts
increase of field strength
high temperature of surrounding medium
increase of mean free path
material of contacts
Ionization in a circuit breaker occurs due to high electric field strength, high temperatures in the surrounding medium, and an increased mean free path of electrons, all of which accelerate ion generation. The material of the contacts itself determines properties like erosion resistance and conductivity, but it does not facilitate or initiate the process of gas ionization during arc formation.
IEC 62271-100 / IS 13118
Ionization in a circuit breaker occurs due to high electric field strength, high temperatures in the surrounding medium, and an increased mean free path of electrons, all of which accelerate ion generation. The material of the contacts itself determines properties like erosion resistance and conductivity, but it does not facilitate or initiate the process of gas ionization during arc formation.
E=dVтАЛ тАФ electric field strength in terms of voltage V and gap distance d
╬╗=2тАЛ╧Аdmol2тАЛPkBтАЛTтАЛ тАФ mean free path showing dependence on temperature T and pressure P
KEтАЛ=qтЛЕEтЛЕ╬╗ тАФ kinetic energy gained by an electron between collisions
Arcing in a circuit breaker is initiated and sustained by field emission and thermal ionization. When contacts separate, the reduced gap causes a huge electric field gradient (E=dVтАЛ), detaching electrons. The high current density elevates temperature, causing thermal ionization of air/gas molecules, while a longer mean free path allows electrons to gain sufficient kinetic energy to cause collision ionization.
Ionization is the process by which neutral gas molecules gain or lose electrons to form free ions and electrons.
Higher temperature increases thermal agitation, supplying thermal energy to detach electrons (thermal ionization).
An increase in field strength (E) accelerates free electrons to sufficient velocity to cause collision ionization.
A longer mean free path (╬╗) allows electrons to travel farther without colliding, acquiring higher kinetic energy before impact.
The material of contacts affects thermal conduction, melting point, and arc resistance, but does not initiate or facilitate the ionization mechanism of the dielectric medium.
Designing arc quenching media in Circuit Breakers (SF6, Vacuum, Air Blast).
Determining dielectric strength recovery in switchgear protection.
Option A is correct because contact material properties (such as Cu-Cr or Ag-CdO) dictate arc erosion resistance and conductivity rather than gas ionization kinetics.
Option B (Increase of field strength) increases electron kinetic energy, facilitating collision ionization.
Option C (High temperature) increases thermal excitation energy, promoting thermal ionization.
Option D (Increase of mean free path) lowers gas density, permitting electrons to accelerate longer to reach ionization potential energy.
A is correct тАФ The material of contacts does not facilitate the ionization process of the arc medium in a circuit breaker.
For competitive exams like GATE/ESE, remember: Arc extinction is achieved by deionizing the gap, which is done by increasing pressure (reducing mean free path ╬╗), cooling the arc (lowering T), or increasing gap length (lowering field E).