Join 60,000+ competitive exam aspirants
If power P available from a hydro-scheme is given by the formula P = 9.81QH, where Q is the flow rate through the turbine in l/s and H is the head in meters, then P will be in units of
W
HP
kJ/s
kWh
W
The formula P=9.81QH represents the mechanical power output of a hydraulic turbine where Q is the discharge in m3/s or l/s and H is the net head in meters. When Q is measured in l/s, the constant 9.81 (the product of water density ╧БтЙИ1000kg/m3, gravity gтЙИ9.81m/s2, and the conversion factor for liters 10тИТ3) results in the power P being expressed in Watts (W).
The formula P=9.81QH represents the mechanical power output of a hydraulic turbine where Q is the discharge in m3/s or l/s and H is the net head in meters. When Q is measured in l/s, the constant 9.81 (the product of water density ╧БтЙИ1000kg/m3, gravity gтЙИ9.81m/s2, and the conversion factor for liters 10тИТ3) results in the power P being expressed in Watts (W).
P=╧БgQH тАФ Theoretical power from water column
P=9.81QH тАФ Power in Watts for Q in l/s and H in meters
The principle is based on the conversion of potential energy of water into mechanical kinetic energy. Power is defined as the rate of doing work, calculated as P=╧БтЛЕgтЛЕQтЛЕH. Since ╧Б=1000kg/m3 and g=9.81m/s2, if Q is taken in l/s (where 1l/s=0.001m3/s), then P=1000├Ч9.81├Ч(Q/1000)├ЧH=9.81QH, yielding the unit in Joules per second, which is Watts.
The constant 9.81 accounts for water density (1000kg/m3) and acceleration due to gravity (9.81m/s2).
Conversion of l/s to m3/s is inherent in the coefficient 9.81.
The formula assumes 100% efficiency; actual turbine output is multiplied by efficiency (╬╖).
Simplifies calculation of hydro capacity for standard units
Directly provides electrical output unit (Watts)
Does not account for efficiency losses
Only valid for water density of 1000kg/m3
Preliminary sizing of micro and mini hydro power plants
Estimation of theoretical hydraulic energy potential
Option B (HP) is related to Watts by the conversion 1HPтЙИ746W.
Option C (kJ/s) is dimensionally equivalent to Watts, but 9.81QH specifically outputs Watts directly.
Option D (kWh) is a unit of energy, not power.
A is correct тАФ The formula yields power in Watts when flow is in l/s and head is in meters.
Always verify units (l/s vs m3/s) before applying coefficients in engineering formulas, as this is a common source of calculation errors in competitive exams.