Join 60,000+ competitive exam aspirants
The power output from an hydro-electric power plant depends on
Type of dam, type of catchment area and discharge
Type of dam, head and system efficiency
Discharge, head and system efficiency
Type of turbine, type of dam and type of catchment area
Discharge, head and system efficiency
The power output of a hydroelectric power plant is directly proportional to the potential energy of the water stored at a height (head) and the rate at which this water flows through the turbines (discharge). The overall system efficiency accounts for losses in the penstock, turbine, and generator, which determines the final electrical power delivered to the grid.
The power output of a hydroelectric power plant is directly proportional to the potential energy of the water stored at a height (head) and the rate at which this water flows through the turbines (discharge). The overall system efficiency accounts for losses in the penstock, turbine, and generator, which determines the final electrical power delivered to the grid.
P=╬╖тЛЕ╧БтЛЕgтЛЕQтЛЕH тАФ Power output in Watts
╬╖=╬╖hтАЛтЛЕ╬╖mтАЛтЛЕ╬╖gтАЛ тАФ Overall efficiency as product of hydraulic, mechanical, and generator efficiency
The potential energy of water at a height H is given by mgh. When this water flows at a rate of Qm3/s, the power available is calculated as the product of the water density, acceleration due to gravity, head, and discharge. Multiplying this by the overall system efficiency (eta) yields the electrical power output at the generator terminals.
Head (H) is the vertical difference between the reservoir level and the tailrace level.
Discharge (Q) is the volumetric flow rate of water passing through the turbine.
System efficiency (╬╖) is always less than unity due to friction, leakage, and electrical losses.
The density of water (╧Б) is taken as 1000┬аkg/m3.
Renewable and clean energy source
High operational life and low maintenance
High initial capital investment
Dependent on hydrological cycles and site topography
Base load and peak load power generation
Pumped storage for grid frequency regulation
The type of dam affects the head and storage capacity, but the power itself is a function of the physics parameters Q, H, and ╬╖.
Option A is incorrect because the 'type of dam' is a design choice, not a direct variable in the instantaneous power equation.
Option B is incorrect because discharge is the primary driver of fluid power, which is missing from the list.
C is correct тАФ The power output of a hydro-electric plant is mathematically defined by the product of discharge (Q), net head (H), water density (╧Б), gravity (g), and system efficiency (╬╖).
Always remember that in any generator system, the mechanical power input is PmechтАЛ=╧БgQH, and the electrical output is PelecтАЛ=PmechтАЛ├Ч╬╖.