Join 60,000+ competitive exam aspirants
If residual magnetism is present in a DC generator, the induced emf at zero speed will be
small
high
zero
the same as rated voltage
zero
The induced electromotive force (EMF) in a DC generator is directly proportional to the speed of the armature rotation. Since the speed (N) is zero, the rate of change of magnetic flux linkages is zero, resulting in zero induced EMF regardless of the presence of residual magnetism.
The induced electromotive force (EMF) in a DC generator is directly proportional to the speed of the armature rotation. Since the speed (N) is zero, the rate of change of magnetic flux linkages is zero, resulting in zero induced EMF regardless of the presence of residual magnetism.
EgтАЛ=60A╬жPNZтАЛ тАФ EMF equation for a DC generator where N is speed in RPM
e=Blv тАФ Basic motional EMF formula showing dependence on velocity v
According to Faraday's Law of Electromagnetic Induction, e=dtd╬жтАЛ=Blv. When the speed of the machine is zero (v=0), the relative motion between the armature conductors and the magnetic field is non-existent. Consequently, there is no cutting of flux lines by the conductors, which makes the induced EMF exactly zero.
Induced EMF depends on flux, speed, and machine constants.
Residual magnetism is necessary for self-excitation but cannot generate voltage at standstill.
Without mechanical input (motion), the generator acts as a passive circuit.
Residual magnetism allows self-excited generators to build up voltage.
Predictable behavior at zero speed.
Residual magnetism can be lost if the machine is idle for long periods or subjected to heavy vibration.
DC shunt generators
Separately excited DC generators
Residual magnetism is the magnetism remaining in the field poles even when the excitation current is zero.
Option A is incorrect because zero speed means zero mechanical input, leading to zero output voltage.
Option D is incorrect because the rated voltage is only achieved at rated speed and rated field current.
C is correct тАФ Induced EMF is directly proportional to speed, and at zero speed, there is no flux cutting, resulting in zero EMF.
In any machine, if the speed is zero, the generated EMF is zero; always verify the mechanical speed parameter before calculating induced voltage in competitive exam problems.