Join 60,000+ competitive exam aspirants
With the increases in field excitation of a DC generator, its generated emf
decreases
increases
remains constant
increases up to a limit and then remains almost constant
increases up to a limit and then remains almost constant
The generated EMF of a DC generator depends on the magnetic flux per pole produced by the field excitation. As field current increases, flux increases linearly initially, but due to magnetic saturation of the iron core, the flux and consequently the EMF eventually level off.
The generated EMF of a DC generator depends on the magnetic flux per pole produced by the field excitation. As field current increases, flux increases linearly initially, but due to magnetic saturation of the iron core, the flux and consequently the EMF eventually level off.
EgтАЛ=60AP╧ХZNтАЛ тАФ EMF equation where ╧Х is flux per pole
EgтАЛтИЭ╧Х тАФ Proportionality of generated EMF to magnetic flux
The EMF equation is given by EgтАЛ=60AP╧ХZNтАЛ. Since P,Z,N,A are constants for a given machine, EgтАЛтИЭ╧Х. As field excitation (IfтАЛ) increases, the core moves from the linear region of the B-H curve into the saturation region. Once saturated, further increases in IfтАЛ produce negligible changes in ╧Х, causing EgтАЛ to remain nearly constant.
Magnetic saturation limits the maximum flux density in the machine core.
The linear portion of the magnetization curve represents the unsaturated state.
Beyond the 'knee' of the B-H curve, large increases in field current yield very small increases in flux.
Stable voltage output at high field excitation
Predictable operating characteristics in the saturation region
Increased copper losses at high field currents
Thermal heating limits the maximum allowable excitation
Voltage regulation in shunt-wound DC generators
Constant voltage power supplies
The phenomenon is fundamentally governed by the B-H magnetization curve (or O.C.C - Open Circuit Characteristic).
Option B is incorrect because it ignores the physical limitation imposed by core saturation.
D is correct тАФ The generated EMF follows the magnetization curve, increasing with excitation until the magnetic core reaches saturation, after which it remains nearly constant.
Always remember that in electrical machines, the 'knee' of the magnetization curve is the design limit; operating significantly beyond this point is inefficient due to excessive heat and wasted field energy.