Join 60,000+ competitive exam aspirants
The slight curvature at the lower end of the OCC of a self-excited DC generator is due to
high speed
residual flux
magnetic inertia
high field resistance
residual flux
The slight curvature at the lower end of the Open Circuit Characteristic (OCC) of a self-excited DC generator is primarily due to the presence of residual magnetism in the field poles. Even when the field current is zero, this residual flux allows the machine to induce a small emf, preventing the curve from starting exactly at the origin.
The slight curvature at the lower end of the Open Circuit Characteristic (OCC) of a self-excited DC generator is primarily due to the presence of residual magnetism in the field poles. Even when the field current is zero, this residual flux allows the machine to induce a small emf, preventing the curve from starting exactly at the origin.
EgтАЛ=60AP╧ХZNтАЛ тАФ Fundamental emf equation of DC generator
╧ХtotalтАЛ=╧ХresidualтАЛ+╧ХfieldтАЛ тАФ Total flux contribution
In a self-excited generator, the excitation current is derived from the generated emf itself. The induced emf EgтАЛ=60AP╧ХZNтАЛ depends on the flux per pole ╧Х. Since ╧Х is the sum of residual flux and flux due to field current (IfтАЛ), the machine starts building up voltage starting from the residual emf point rather than zero, creating a non-linear 'toe' at the start of the magnetization curve.
The OCC represents the relationship between no-load induced emf and field current at constant speed.
Residual flux is essential for the self-excitation process of shunt and compound generators.
Without residual flux, the generator would fail to build up voltage under no-load conditions.
Eliminates the need for external DC excitation sources.
Simplified machine construction and field circuit design.
Requires high retentivity of magnetic material for stable starting.
Susceptible to losing residual magnetism if the machine is idle for long periods or suffers a shock.
Used in standard DC shunt and compound generators.
Common in laboratory setups and stand-alone power generation.
If the field circuit resistance is greater than the critical field resistance, the generator will fail to build up voltage.
Option A (high speed) affects the slope of the curve but not the start point. Option C is a property of the magnetic material affecting hysteresis. Option D determines the stability of the voltage buildup, not the initial curvature.
B is correct тАФ The presence of residual flux causes the magnetization curve to start at a non-zero voltage value, creating a curvature at the origin.
Always remember: If a generator fails to build up voltage, check for low residual magnetism first, then check the field circuit resistance relative to the critical resistance.