Join 60,000+ competitive exam aspirants
In a 3 phase, 4 wire cable, the cross sectional area of neutral conductor is
Half of the area of phase conductor
Equal to the area of phase conductor
Double the area of phase conductor
5 times the area of phase conductor
Equal to the area of phase conductor
In standard 3-phase, 4-wire power distribution cables, the neutral conductor is sized to be equal to the cross-sectional area of the phase conductors. This ensures that the neutral cable can handle the maximum expected unbalanced load current under normal operating conditions.
In standard 3-phase, 4-wire power distribution cables, the neutral conductor is sized to be equal to the cross-sectional area of the phase conductors. This ensures that the neutral cable can handle the maximum expected unbalanced load current under normal operating conditions.
INтАЛ=IRтАЛ+IYтАЛ+IBтАЛ тАФ Neutral current is the vector sum of individual phase currents.
AneutralтАЛ=AphaseтАЛ тАФ Standard design practice for distribution cables.
In a balanced 3-phase system, the vector sum of currents is zero, resulting in no neutral current. However, in low-voltage distribution systems, loads are often single-phase and distributed unevenly across phases, creating a return path current in the neutral. Since the neutral is designed to potentially carry the same magnitude of current as any single phase, its cross-sectional area is kept equal to the phase conductor to prevent overheating and ensure impedance matching.
Used in 3-phase 4-wire systems (Star connection with neutral).
Essential for handling unbalanced loads in residential and commercial sectors.
Ensures the neutral path has low resistance, preventing voltage drift in phase-to-neutral voltages.
Required for safety in cases of insulation failure resulting in fault currents.
Maintains constant phase-to-neutral voltage under unbalanced loads.
Provides a return path for leakage currents.
Simplifies cable manufacturing and inventory.
Increased cable cost compared to using a reduced neutral in specific specialized scenarios.
Increases the overall weight and diameter of the cable.
Low voltage distribution networks (415V/240V).
Commercial building power supply cabling.
Industrial lighting and control circuits.
While some high-voltage or specialized transmission systems allow for reduced neutral conductors, the standard IS:1554/IS:7098 for LT cables generally specifies equal sizing for the neutral.
Option A is incorrect because halving the area increases resistance and overheating risk under high unbalance.
B is correct тАФ In 3-phase, 4-wire systems, the neutral conductor must have the same cross-sectional area as the phase conductors to safely carry the neutral return current.
Always remember that in the context of Indian Standards (IS), unless specified as a special reduced-neutral design, assume the neutral is equal to the phase size for distribution cables.