Join 60,000+ competitive exam aspirants
In a boiler, the carry over of slugs of water into the piping because of dirty water is called the
Foaming
Pitting
Scalping
Beating
Foaming
Foaming is the formation of stable, persistent bubbles at the water surface in a boiler, which leads to the carry-over of water slugs into the steam piping. This phenomenon occurs due to the presence of dissolved impurities, such as oils, fats, grease, and high concentrations of suspended solids, which reduce surface tension.
Foaming is the formation of stable, persistent bubbles at the water surface in a boiler, which leads to the carry-over of water slugs into the steam piping. This phenomenon occurs due to the presence of dissolved impurities, such as oils, fats, grease, and high concentrations of suspended solids, which reduce surface tension.
╧ГeffтАЛ=╧ГpureтАЛтИТ╬Ф╧Г тАФ Surface tension reduction due to impurities, facilitating bubble stability.
In a boiler, when the concentration of dissolved and suspended impurities reaches a critical level, the surface tension of the boiling water is lowered. This allows steam bubbles to form a stable, foam-like layer on the water surface. As these bubbles accumulate and rise, they bridge the space between the water level and the steam outlet, effectively carrying water droplets (slugs) into the steam lines.
Foaming is primary caused by saponifiable matter, grease, and oils.
It leads to 'priming' (violent carry-over of water).
It can cause severe damage to turbine blades if used in thermal power plants.
Corrected by blowdown and surface skimming.
Reduces boiler thermal efficiency
Causes water hammer in steam piping
Damages superheater tubes and turbine blades
Pitting is a localized corrosion phenomenon, not related to water carry-over.
Scalping is not a recognized boiler water treatment term.
Beating is not a standard engineering term in this context.
A is correct тАФ Foaming causes the formation of persistent bubbles that result in the mechanical carry-over of water slugs into the steam delivery system.
In power plants, always differentiate between 'Foaming' (chemical surface tension effect) and 'Priming' (mechanical carry-over due to high boiler water level), though foaming often causes priming.