Join 60,000+ competitive exam aspirants
A super critical boiler is one that operates above the pressure and temperature of the following values
100┬аkg/cm2 and 540┬░C
218┬аkg/cm2 and 540┬░C
100┬аkg/cm2 and 373┬░C
218┬аkg/cm2 and 373┬░C
218┬аkg/cm2 and 540┬░C
A supercritical boiler operates at pressures and temperatures exceeding the critical point of water, specifically above 22.1┬аMPa (218┬аatm or approx 218┬аkg/cm2) and 374┬░C. At these values, the distinction between the liquid and vapor phases disappears, and there is no boiling phenomenon.
A supercritical boiler operates at pressures and temperatures exceeding the critical point of water, specifically above 22.1┬аMPa (218┬аatm or approx 218┬аkg/cm2) and 374┬░C. At these values, the distinction between the liquid and vapor phases disappears, and there is no boiling phenomenon.
PcтАЛтЙИ221.2┬аbar=22.1┬аMPaтЙИ218┬аatm тАФ Critical pressure of water
TcтАЛтЙИ374.14┬░C тАФ Critical temperature of water
In supercritical cycles, water enters the boiler tubes as a compressed fluid and transitions directly into steam without a distinct phase-change or boiling process. This eliminates the need for a steam drum, as the density changes continuously, leading to higher cycle efficiency and reduced fuel consumption.
No latent heat of vaporization is required at supercritical pressures.
Elimination of the steam drum reduces the boiler weight and startup time.
Supercritical plants are typically designed for higher temperatures, often 540┬░CтИТ600┬░C, to maximize Carnot efficiency.
Thermodynamic transition is continuous; there is no 'boiling' surface.
Higher thermal efficiency compared to subcritical units.
Reduced CO2тАЛ emissions per unit of electricity generated.
Lower fuel consumption for the same power output.
Requires high-grade alloys for boiler tubes to withstand extreme conditions.
Sophisticated control systems required due to low thermal storage capacity.
Higher initial capital investment.
Modern high-capacity thermal power stations (660MW, 800MW+).
Large-scale base load power generation.
| Feature | Subcritical | Supercritical |
|---|---|---|
Phase Change | Boiling occurs at constant T | No phase change (continuous) |
The value 373┬░C is often used as a near-approximation for the critical point, but the exact physics point is 374.14┬░C.
Option D is incorrect because while it mentions the critical pressure, the temperature listed is below the critical point.
B is correct тАФ A supercritical boiler operates at pressures and temperatures above the critical point of water (218┬аkg/cm2 and 374┬░C), with 540┬░C being a standard operational superheat temperature.
Always remember that 'supercritical' refers to both pressure AND temperature exceeding the critical point. If only one is exceeded, it does not achieve true supercritical state operation.