Join 60,000+ competitive exam aspirants
Critical pressure for steam is in the range of
50 тАУ 100 kg/cm2
100 тАУ 200 kg/cm2
200 тАУ 250 kg/cm2
Above 300 kg/cm2
200 тАУ 250 kg/cm2
The critical pressure for water is the pressure at which the distinction between liquid and vapor phases disappears, creating a single-phase supercritical fluid. For water, this thermodynamic critical point occurs at exactly 221.2 bar or approximately 225.6 kg/cm^2.
The critical pressure for water is the pressure at which the distinction between liquid and vapor phases disappears, creating a single-phase supercritical fluid. For water, this thermodynamic critical point occurs at exactly 221.2 bar or approximately 225.6 kg/cm^2.
PcriticalтАЛтЙИ221.2┬аbarтЙИ225.6┬аkg/cm2
TcriticalтАЛтЙИ374.15┬░C
As pressure increases toward the critical point, the latent heat of vaporization approaches zero. Once the pressure exceeds this critical value, the water undergoes a continuous transition from liquid-like to gas-like properties without boiling. In modern thermal power plants, supercritical boilers operate above this threshold to maximize the Carnot efficiency of the Rankine cycle.
At critical pressure, the density of saturated liquid equals the density of saturated steam.
Supercritical power plants eliminate the drum (once-through boilers) because there is no liquid-vapor interface.
Operating above critical pressure significantly improves cycle efficiency by reducing heat loss in the boiler.
Higher thermal efficiency compared to subcritical plants.
Reduced fuel consumption and lower CO2 emissions per unit of power generated.
Requires more advanced metallurgical alloys to withstand high pressures and temperatures.
More complex control systems for feed-water flow management.
Supercritical and Ultra-supercritical thermal power plants.
High-pressure chemical processing reactors.
The range 200тАУ250 kg/cm^2 is the standard engineering approximation for the critical point of water (225.6 kg/cm^2).
Option A is far below the critical pressure. Option B is in the high-pressure subcritical range. Option D refers to ultra-high-pressure conditions which are significantly above the critical threshold.
C is correct тАФ The critical pressure of steam is approximately 225.6 kg/cm^2, which falls within the range of 200тАУ250 kg/cm^2.
In exams, remember that supercritical steam implies no boiling process occurs inside the boiler tubes, differentiating it from traditional drum-type subcritical boilers.