Join 60,000+ competitive exam aspirants
In a core type transformer
HV winding is placed nearer to the core limb.
LV winding is placed nearer to the core limb.
Any of the LV or HV can be placed nearer to the core limb.
HV and LV windings are placed in different core limbs.
LV winding is placed nearer to the core limb.
In a core-type transformer, the Low Voltage (LV) winding is placed closer to the core limb, while the High Voltage (HV) winding is placed over the LV winding. This configuration is standard to optimize insulation requirements and magnetic coupling.
In a core-type transformer, the Low Voltage (LV) winding is placed closer to the core limb, while the High Voltage (HV) winding is placed over the LV winding. This configuration is standard to optimize insulation requirements and magnetic coupling.
InsulationтИЭVwindingтАЛ тАФ Insulation thickness requirement is directly proportional to voltage level
L=lN2╬╝AтАЛ тАФ Basic inductance relationship demonstrating the importance of core proximity
Placing the LV winding closer to the core significantly reduces the amount of insulation required between the winding and the core limb, as the LV winding operates at a lower potential relative to the earthed core. Additionally, this arrangement minimizes the leakage flux by keeping the LV winding physically closer to the magnetic circuit, which improves the overall efficiency and regulation of the transformer.
Minimizes the quantity of expensive high-voltage insulation material required.
Reduces leakage flux between windings, enhancing transformer performance.
Provides mechanical stability by nesting the cylindrical coils.
The core itself is always earthed, making the LV winding placement safer.
Requires less insulation material.
Improved electromagnetic coupling.
Lower overall transformer cost.
Higher leakage reactance compared to interleaved designs.
Complex insulation coordination for very high power ratings.
Distribution transformers.
Small to medium power transformers.
Option A is incorrect because placing HV winding nearest to the core would necessitate a very thick, high-cost insulation layer between the core and the winding.
This design is a standard practice in core-type construction to ensure economic and electrical efficiency.
B is correct тАФ Placing the LV winding near the core limb minimizes the insulation thickness required between the winding and the earthed core.
Always remember that in electrical design, proximity to the core limb is dictated by voltage potential; lower potential windings are always placed closer to the earthed magnetic path.