Join 60,000+ competitive exam aspirants
Why HV winding is always placed above the LV winding in a core type transformer?
to reduce copper cost
to reduce insulation cost
to provide better cooling
to provide more mechanical strength
to reduce insulation cost
In a core-type transformer, the Low Voltage (LV) winding is placed closer to the core and the High Voltage (HV) winding is placed over the LV winding. This arrangement significantly reduces the amount of insulation required between the windings and the transformer core.
In a core-type transformer, the Low Voltage (LV) winding is placed closer to the core and the High Voltage (HV) winding is placed over the LV winding. This arrangement significantly reduces the amount of insulation required between the windings and the transformer core.
VinsulationтАЛтИЭ(VHVтАЛтИТVcoreтАЛ)
CostтИЭVinsulationтАЛ
The transformer core is at earth potential. Since the LV winding is closer to the core, the insulation requirement between the LV winding and the core is relatively low. By placing the HV winding over the LV winding, the space between the HV and LV windings is filled with insulating material (like paper or oil), which is much cheaper and more effective than insulating the high-voltage potential of the HV winding from the grounded core.
The core is at ground potential.
LV winding is placed near the core to minimize core-to-winding insulation thickness.
HV winding is placed on the outside, requiring insulation only between HV and LV.
This arrangement simplifies the winding process and cooling duct design.
Reduces the cost of insulation materials.
Simplifies the assembly of the transformer.
Provides a more robust mechanical support for the windings.
Higher leakage reactance between windings compared to sandwich windings.
Increased weight due to additional insulating barriers.
Distribution transformers
Power transformers
If the HV winding were placed near the core, a massive amount of high-grade insulation would be required between the winding and the core to prevent dielectric breakdown.
Option A is incorrect because the amount of copper is primarily determined by current and flux density, not the placement order.
B is correct тАФ Placing the LV winding near the core significantly reduces the thickness and cost of the insulation required between the winding and the grounded core.
Always remember that in electrical design, the 'grounded component' (core) should be kept closest to the 'lowest potential component' (LV winding) to save on costs.