Join 60,000+ competitive exam aspirants
Core type transformers have, LV and HV windings are arranged such that
Half LV near the core and half HV outside LV on each limb
LV on one limb and HV on the other
Half LV outside the core and half HV inside LV on each limb
LV and HV windings are sandwiched
Half LV near the core and half HV outside LV on each limb
In core-type transformers, the Low Voltage (LV) winding is placed nearest to the magnetic core limb to minimize the insulation requirement between the winding and the core. The High Voltage (HV) winding is then placed concentrically over the LV winding to reduce the leakage reactance and material volume.
In core-type transformers, the Low Voltage (LV) winding is placed nearest to the magnetic core limb to minimize the insulation requirement between the winding and the core. The High Voltage (HV) winding is then placed concentrically over the LV winding to reduce the leakage reactance and material volume.
LlтАЛтИЭ(N2тЛЕarealeakage┬аpath┬аlengthтАЛ) тАФ describes how leakage inductance is influenced by winding geometry.
VinsтАЛтИЭVwindingтАЛтЛЕd тАФ relationship between required insulation distance and winding voltage.
Placing the LV winding near the core significantly reduces the thickness of insulation required between the windings and the core, which is grounded. The core window area is utilized more efficiently by placing the lower voltage (thinner insulation) winding inside, while the HV winding, which requires more substantial dielectric spacing, is placed outside.
LV windings are placed near the core to save on costly high-dielectric insulation material.
Concentric winding arrangement reduces the leakage flux and magnetic reluctance between windings.
Core-type transformers have two limbs with windings distributed on both.
Lower cost of insulation between core and LV winding.
Efficient space utilization in the window area.
Improved mechanical strength against short-circuit forces.
Higher leakage reactance compared to shell-type if not designed carefully.
More difficult to repair individual inner windings.
Power transmission networks.
High voltage distribution transformers.
Option B is incorrect because placing windings on separate limbs increases magnetic leakage and prevents proper flux linkage.
Option C is invalid as it contradicts the primary goal of minimizing insulation thickness near the grounded core.
Option D describes 'Sandwich' or 'Disc' windings typically used in Shell-type transformers.
A is correct тАФ The LV winding is placed adjacent to the core to minimize insulation requirements, while the HV winding is placed concentrically outside it.
Always remember the mnemonic 'L-I-C' for Core-type: LV is Inward/Close to the core.