Join 60,000+ competitive exam aspirants
The shell type transformers have, LV and HV windings are arranged such that
Half LV near the core and half HV outside LV on each limb
LV on one limb and HV on the other
Half LV outside the core and half HV inside LV on each limb
LV and HV windings are sandwiched
LV and HV windings are sandwiched
In a shell-type transformer, the windings are arranged in a sandwich configuration where the LV and HV coils are interleaved or stacked alternatively along the core limb. This specific winding arrangement significantly reduces the magnetic leakage flux between the LV and HV windings.
In a shell-type transformer, the windings are arranged in a sandwich configuration where the LV and HV coils are interleaved or stacked alternatively along the core limb. This specific winding arrangement significantly reduces the magnetic leakage flux between the LV and HV windings.
LlтАЛтИЭm21тАЛ тАФ where m is the number of sandwich groups, showing reduced leakage inductance with more interleaving
The leakage flux is proportional to the square of the number of ampere-turns and inversely proportional to the reluctance of the leakage path. By interleaving (sandwiching) the LV and HV windings, the leakage flux path length increases while the area of the leakage path effectively decreases. This configuration forces the magnetic flux to remain tightly coupled, thereby lowering the leakage reactance XLтАЛ=2╧АfLlтАЛ of the transformer.
Shell-type transformers utilize a multi-layer sandwich winding construction.
This arrangement provides excellent mechanical support against electromagnetic forces during short-circuit conditions.
The core surrounds the coils, which provides natural shielding for the windings.
Significantly reduced leakage reactance
Enhanced mechanical strength of windings
Improved protection of windings due to core shielding
Complex insulation requirements between the interleaved layers
Difficult to repair or replace individual coils
High-voltage, high-capacity power transformers
Transformers requiring low impedance characteristics
The sandwich construction is essentially a series of alternate discs of LV and HV coils.
Option A describes a typical Core-type transformer winding arrangement (concentric).
Option B is typically used in Core-type transformers with separate limbs.
D is correct тАФ The shell-type transformer employs a sandwich arrangement where HV and LV windings are alternated in disc-like sections to minimize magnetic leakage.
Always remember that 'Sandwich' = Shell-type (Low leakage) and 'Concentric' = Core-type (Easy to repair).