Join 60,000+ competitive exam aspirants
In a DC three wire distribution system, balancer fields are cross connected in order to
Equalize voltages on positive and negative
Boost the generated voltage
Make both machines operated as unloaded motors
All of above
Equalize voltages on positive and negative
In a DC three-wire system, a balancer set (consisting of two identical shunt-connected DC machines coupled mechanically) is used to maintain the potential of the neutral wire. Cross-connecting the fields ensures that if the voltage on one side drops due to an unbalanced load, the machine on that side acts as a motor while the other acts as a generator, effectively shifting the load to stabilize the voltages.
In a DC three-wire system, a balancer set (consisting of two identical shunt-connected DC machines coupled mechanically) is used to maintain the potential of the neutral wire. Cross-connecting the fields ensures that if the voltage on one side drops due to an unbalanced load, the machine on that side acts as a motor while the other acts as a generator, effectively shifting the load to stabilize the voltages.
VpositiveтАЛ=VnegativeтАЛ=2VtotalтАЛтАЛ
When the load on the positive and negative sides is unequal, the machine on the heavily loaded side (lower voltage) acts as a motor, while the machine on the lightly loaded side (higher voltage) acts as a generator. By cross-connecting the fields, the motor field is strengthened and the generator field is weakened, causing the motor side voltage to rise and the generator side voltage to fall, thereby equalizing the potential difference between each outer wire and the neutral wire.
The balancer set consists of two identical DC shunt machines.
Cross-connection provides a self-regulating mechanism for voltage.
Neutral current flows through the balancer set to compensate for the unbalance.
Without the balancer, the voltage drops across the two sides would be significantly unequal under unbalanced load conditions.
Maintains constant voltage despite load fluctuations
Allows for economical use of conductors in three-wire distribution
Requires additional mechanical and electrical components
Maintains constant power loss even during light load conditions
DC traction systems
DC power supply for large industrial complexes
Laboratory DC power distribution
The process is often described as 'auto-balancing' due to the feedback loop created by the cross-field connection.
Option B is incorrect because boosters are used to increase voltage magnitude in feeders, not for balancing mid-point potentials.
Option C is incorrect because the machines must act as a motor-generator pair to perform the balancing function.
A is correct тАФ The cross-connection of the balancer fields provides a regenerative feedback mechanism that automatically equalizes the voltage between the positive/neutral and negative/neutral rails under unbalanced load conditions.
Always remember that in DC distribution, the 'balancer' is specifically for neutral stability, whereas a 'booster' is used for voltage drop compensation in long feeders.