Join 60,000+ competitive exam aspirants
A booster is a
Series wound DC generator
Shunt wound DC generator
Cumulative compound wound DC generator
Differential compound wound DC generator
Series wound DC generator
A booster is a series-wound DC generator connected in series with a feeder line to compensate for the voltage drop occurring along the transmission or distribution line. It adds a voltage magnitude proportional to the load current to maintain a constant voltage at the load end.
A booster is a series-wound DC generator connected in series with a feeder line to compensate for the voltage drop occurring along the transmission or distribution line. It adds a voltage magnitude proportional to the load current to maintain a constant voltage at the load end.
EbтАЛтИЭILтАЛ тАФ The induced EMF of the booster is proportional to load current ILтАЛ
VoutputтАЛ=VinputтАЛ+EbтАЛ тАФ Total voltage at the load end
As load current flows through the series field and armature, the generator produces an EMF directly proportional to the current (within the linear range). Since the feeder voltage drop VdropтАЛ=IтЛЕRfeederтАЛ also increases with current, the booster effectively offsets this loss by providing a voltage boost that tracks the load demand.
Used to maintain constant voltage at the consumer end in DC distribution systems.
Must be series-excited because the boost voltage needs to vary according to the load current.
The booster is driven at a constant speed by a prime mover (usually an induction motor).
Automatic compensation for line voltage drops
Simple construction using series field windings
Cannot regulate voltage if the load current is zero
Requires a separate prime mover for operation
DC distribution networks
Tramway and railway supply systems
Option B (Shunt) is unsuitable as it provides constant voltage regardless of line current drop.
Compound generators are typically used for constant voltage power supply, not for compensating variable line drops.
A is correct тАФ A booster is essentially a series-wound DC generator designed to add voltage to a circuit in proportion to the load current.
Always remember that 'Series' machines have characteristics where the flux depends on the load current, making them ideal for load-dependent compensation tasks like boosting.