Join 60,000+ competitive exam aspirants
In a DC transmission line
It is necessary for the sending end and receiving end to be operated in synchronism
The effect of inductive and capacitive reactance are greater than in AC transmission line of the same rating
There are no effect due to inductive and capacitive reactance
Power transfer capability is limited by stability consideration
There are no effect due to inductive and capacitive reactance
In a DC transmission line, the current flow is unidirectional and constant, which implies that the frequency is effectively zero. Because inductive reactance XLтАЛ=2╧АfL and capacitive reactance XCтАЛ=2╧АfC1тАЛ are dependent on frequency, they do not produce any impedance effects in a pure DC steady-state condition.
In a DC transmission line, the current flow is unidirectional and constant, which implies that the frequency is effectively zero. Because inductive reactance XLтАЛ=2╧АfL and capacitive reactance XCтАЛ=2╧АfC1тАЛ are dependent on frequency, they do not produce any impedance effects in a pure DC steady-state condition.
XLтАЛ=2╧АfL тАФ Inductive reactance formula
XCтАЛ=2╧АfC1тАЛ тАФ Capacitive reactance formula
In DC circuits, the inductor acts as a short circuit (ideal) and the capacitor acts as an open circuit (after charging). Since there is no continuous variation in current or voltage polarity, there is no electromagnetic induction or time-varying displacement current to facilitate inductive or capacitive reactance effects.
DC transmission eliminates reactive power flow caused by line inductance and capacitance.
Stability limits in DC transmission are governed by converter control rather than synchronous power-angle stability.
DC lines do not suffer from the Ferranti effect, which is common in AC lines due to charging current.
No reactive power compensation needed for transmission line reactance
Lower transmission line cost for long distances
No skin effect
Expensive converter stations required at both ends
Difficulty in circuit breaking due to lack of natural current zero
Long-distance bulk power transmission
Asynchronous interconnection of two AC grids
Underground or underwater submarine cables
Option B is incorrect because inductive and capacitive reactances are nonexistent in pure DC.
Option D is incorrect because stability in DC links is managed by the power electronics converters, not the classical rotor angle stability of AC alternators.
Option A is incorrect because DC links allow for asynchronous operation of two different AC grids.
C is correct тАФ In DC transmission, because the frequency is zero, the inductive reactance and capacitive reactance terms vanish, resulting in no reactive effect on the transmission line.
Always remember that in DC transmission, frequency is 0 Hz, which simplifies XLтАЛ to 0 and XCтАЛ to an open circuit (infinity impedance).