Join 60,000+ competitive exam aspirants
In a jet type condenser
Steam passes through tubes and cooling water surrounds them
Water passes through tubes and steam surrounds them
Steam and cooling water mix
None of above
Steam and cooling water mix
A jet condenser is a type of condenser where the exhaust steam and the cooling water are brought into direct contact and mixed. Because the steam and water mingle, the condensate cannot be directly recovered for boiler feed without treatment.
A jet condenser is a type of condenser where the exhaust steam and the cooling water are brought into direct contact and mixed. Because the steam and water mingle, the condensate cannot be directly recovered for boiler feed without treatment.
Q=msтАЛ(hsтАЛтИТhcтАЛ) тАФ Heat rejected by steam
Q=mwтАЛ(hw2тАЛтИТhw1тАЛ) тАФ Heat gained by cooling water
In a jet condenser, exhaust steam from the turbine is sprayed with cooling water inside a chamber. Due to direct contact, heat exchange occurs, causing the steam to condense. The mixture of cooling water and condensate is then removed from the condenser using a pump.
Operates on the principle of direct contact (mixing) of fluids.
Commonly known as 'low-level' or 'high-level' jet condensers.
Requires a vacuum pump to maintain the vacuum by removing non-condensable gases.
The cooling water and condensate are discharged together.
Simple in construction and low initial cost.
Requires less floor space compared to surface condensers.
Condensate is lost and cannot be reused as high-quality boiler feed water.
Higher risk of water contamination.
Inefficient for very large power plant capacities.
Small-capacity steam power plants.
Industrial plants where condensate recovery is not the primary priority.
| Feature | Jet Condenser | Surface Condenser |
|---|---|---|
Contact | Direct Mixing | Indirect/Separated |
Option A describes a Surface Condenser where fluids are separated by tube walls.
Option B also describes a Surface Condenser configuration.
Jet condensers are generally not used in modern, large-scale thermal power plants due to the loss of treated condensate.
C is correct тАФ In a jet type condenser, steam and cooling water mix directly within the chamber to achieve condensation.
Always remember: Surface condensers are used when you need to recover condensate for high-pressure boilers, whereas Jet condensers are for simpler, lower-capacity systems.