Join 60,000+ competitive exam aspirants
In a shell and tube surface condenser
Steam passes through tubes and cooling water surrounds them
Cooling water passes through the tubes and steam surrounds them
Steam and water mix to give condensate
None of above
Cooling water passes through the tubes and steam surrounds them
In a shell and tube surface condenser used in thermal power plants, the exhaust steam from the turbine enters the shell side, while cooling water circulates through the tubes. The heat transfer occurs as the latent heat of the steam is absorbed by the cooling water, causing the steam to condense into water on the outer surfaces of the tubes.
In a shell and tube surface condenser used in thermal power plants, the exhaust steam from the turbine enters the shell side, while cooling water circulates through the tubes. The heat transfer occurs as the latent heat of the steam is absorbed by the cooling water, causing the steam to condense into water on the outer surfaces of the tubes.
Q=UA╬ФTlmтАЛ тАФ Rate of heat transfer in the condenser
╬ФTlmтАЛ=ln(╬ФT1тАЛ/╬ФT2тАЛ)╬ФT1тАЛтИТ╬ФT2тАЛтАЛ тАФ Logarithmic Mean Temperature Difference
The principle of operation relies on forced convection heat transfer. Cooling water flows through the tube bundle (tube side) to maintain a cold surface temperature. Exhaust steam at low pressure fills the shell cavity (shell side). As steam contacts the cool tube walls, it rejects its latent heat to the circulating water, undergoes a phase change to liquid (condensate), and is collected at the bottom of the shell.
Surface condensers are closed-type condensers where steam and water never mix.
The vacuum in the shell is maintained by vacuum pumps or steam jet ejectors.
High heat transfer coefficient is achieved by keeping water velocity optimal in tubes.
High thermal efficiency due to large heat exchange area
Condensate can be reused as boiler feedwater without treatment
Suitable for high-capacity power plants
Requires large floor space
Complex design and construction costs
Risk of tube leakage leading to contamination
Thermal power plants
Marine steam propulsion systems
Large industrial process steam cycles
A shell and tube condenser prevents contamination of the condensate, which is critical for boiler feedwater quality.
Option A is incorrect as putting water on the shell side would cause excessive pressure drop and contamination risks. Option C describes a 'Jet Condenser', which is different from a 'Surface Condenser'.
B is correct тАФ In a surface condenser, cooling water flows through the tubes to ensure it remains separate from the steam, preventing condensate contamination.
Always remember that in surface condensers, the secondary fluid (cooling water) is inside the tubes to maximize heat exchange efficiency and isolate the working fluid (steam/condensate).