Join 60,000+ competitive exam aspirants
In a pressurized water reactor (PWR)
Light or heavy water is used as both coolant and moderator
Water is used at high pressure (as high as 140┬аkg/cm2) so that it is available in liquid form at about 280┬░C
Coolant water boils in the reactor core
Both (a) and (b)
Both (a) and (b)
A Pressurized Water Reactor (PWR) uses light water as both a coolant and a neutron moderator. To prevent the water from boiling within the reactor core, it is maintained at a very high pressure (approx. 140-155 kg/cm┬▓), which allows it to remain in a liquid state even at high operating temperatures around 280-320┬░C.
A Pressurized Water Reactor (PWR) uses light water as both a coolant and a neutron moderator. To prevent the water from boiling within the reactor core, it is maintained at a very high pressure (approx. 140-155 kg/cm┬▓), which allows it to remain in a liquid state even at high operating temperatures around 280-320┬░C.
P=AFтАЛ тАФ Pressure maintained to suppress boiling
Q=m╦ЩCpтАЛ╬ФT тАФ Heat transfer equation in the primary loop
The PWR operates on a two-loop system. The primary loop circulates high-pressure liquid water through the reactor core to absorb heat. This heated water passes through a steam generator, where it transfers heat to a secondary loop to produce steam, which then drives a turbine.
Light water acts as both the moderator (slowing neutrons) and the primary coolant.
The secondary coolant loop is isolated from the primary loop to prevent radioactive contamination of the turbine.
The pressurizer maintains constant system pressure to ensure the coolant remains subcooled.
Stable power output and self-regulating characteristics.
Compact design compared to other reactor types.
Requires complex high-pressure piping and pressure vessel construction.
Need for enriched uranium fuel.
Nuclear power plants for base-load electricity generation.
Propulsion systems for submarines and aircraft carriers.
Standard operating pressure is typically around 140тИТ155┬аkg/cm2.
Option C is incorrect because the primary loop is specifically designed to prevent boiling in the core to maintain efficient heat transfer.
D is correct тАФ A PWR uses high-pressure liquid water as both coolant and moderator to prevent phase change within the reactor vessel.
Always remember that in a PWR, the primary loop must be subcooled; boiling only occurs in the secondary loop of the steam generator.