Join 60,000+ competitive exam aspirants
In a regenerative feed heating cycle
The optimum value of the fraction of steam extracted for feed water heating increases with the increase in rankine cycle efficiency
The greatest economy is affected when steam is extracted from several places in different stages of the steam turbine
Thermal efficiency is reduced
Both (a) and (b)
The greatest economy is affected when steam is extracted from several places in different stages of the steam turbine
Regenerative feed heating is a cycle modification where steam is extracted from the turbine at various stages to pre-heat the feed water, thereby reducing the heat supplied in the boiler and improving overall cycle efficiency. Increasing the number of feed heating stages leads to higher thermal efficiency, and the optimal extraction fraction is linked to achieving the highest mean temperature of heat addition.
Regenerative feed heating is a cycle modification where steam is extracted from the turbine at various stages to pre-heat the feed water, thereby reducing the heat supplied in the boiler and improving overall cycle efficiency. Increasing the number of feed heating stages leads to higher thermal efficiency, and the optimal extraction fraction is linked to achieving the highest mean temperature of heat addition.
╬╖regenтАЛ=1тИТTavg,additionтАЛTavg,rejectionтАЛтАЛ тАФ Efficiency of the regenerative cycle
QinтАЛ=hboiler,outтАЛтИТhfeedwater,inтАЛ тАФ Heat supplied per kg of steam
In a regenerative cycle, steam is bled from turbine stages to a closed or open feed water heater. This transfer of enthalpy from the steam to the cooler feed water reduces the mass flow rate of steam through the low-pressure turbine stages while raising the liquid temperature entering the boiler. This configuration effectively minimizes the entropy generation associated with large temperature differences between the combustion gases and the working fluid, thus approaching the ideal Carnot efficiency.
Regeneration raises the mean temperature of heat addition to the cycle.
The number of extraction stages is typically limited by capital cost and complexity.
Multiple extraction points closer to the turbine expansion line improve efficiency further.
The fraction of extracted steam depends on the thermodynamic state and desired feedwater temperature.
Improved thermal efficiency of the Rankine cycle.
Reduced thermal stress in the boiler due to higher feedwater temperature.
Decreased moisture content in the later stages of the turbine.
Increased system complexity with multiple heaters.
Higher capital investment costs.
Reduced work output per unit mass of steam expanded in the turbine.
Large-scale thermal power plants.
Marine steam propulsion systems.
Combined heat and power (CHP) installations.
Option B is correct because multiple extraction stages allow the cycle to approximate a reversible heating process.
Option C is incorrect because regeneration is specifically implemented to increase thermal efficiency, not reduce it.
The law of diminishing returns applies to the number of heaters used.
D is correct тАФ The regenerative cycle increases thermal efficiency by preheating feed water, and this benefit is maximized by employing multiple extraction stages.
Always remember: Adding feed water heaters shifts the cycle closer to the Carnot cycle, but increases plant complexity and total capital expenditure.