Join 60,000+ competitive exam aspirants
In a sieve analysis of soil, the total weight of soil taken was 500 g. The mass of soil retained over 4.75 mm sieve was 100 g, mass retained over 2 mm sieve was 150 g, and the mass retained over 425-micron sieve was 200 g. The effective size of the soil will be:
75 microns
4.75 mm
425 microns
2 mm
425 microns
The effective size of soil, denoted as D10тАЛ, is the particle size diameter corresponding to 10% finer in a particle size distribution curve. In this sieve analysis, the total mass is 500┬аg. 10% of this total mass is 50┬аg.
IS 1498:1970
The effective size of soil, denoted as D10тАЛ, is the particle size diameter corresponding to 10% finer in a particle size distribution curve. In this sieve analysis, the total mass is 500┬аg. 10% of this total mass is 50┬аg.
D10тАЛ=Particle┬аdiameter┬аcorresponding┬аto┬а10%┬аfiner
Percentage┬аPassing=100%тИТ(Total┬аMassCumulative┬аMass┬аRetainedтАЛ├Ч100)
The particle size distribution is analyzed by plotting the percentage of soil passing through different sieves. The D10тАЛ size represents the diameter for which 10% of the soil mass consists of particles smaller than this size. By observing the cumulative mass retained or passing, we identify the threshold that marks the 10% mark on the grain size distribution curve.
Effective size D10тАЛ governs the permeability and drainage characteristics of the soil.
Uniformity coefficient CuтАЛ=D10тАЛD60тАЛтАЛ describes the grading of the soil.
Coefficient of curvature CcтАЛ=D10тАЛ├ЧD60тАЛ(D30тАЛ)2тАЛ defines the shape of the distribution curve.
Provides a quantitative basis for classifying soil engineering properties.
Essential for predicting filter design criteria and permeability.
Sieve analysis is limited to soil particles larger than 75┬аmicrons.
Requires significant sample mass for statistical representation.
Design of drainage filters.
Evaluation of soil liquefaction potential.
In the provided data, cumulative mass retained: 4.75mm (100g), 2mm (100+150=250g), 425┬аmicron(250+200=450g).Total passed 425 micron is 500тИТ450=50┬аg. Since 50┬аg is exactly 10% of 500┬аg, the D10тАЛ corresponds to 425┬аmicrons.
Options A, B, and D do not satisfy the condition where 10% of the soil mass passes through the sieve.
C is correct тАФ The particle size 425┬аmicrons allows exactly 10% of the total soil mass to pass, satisfying the definition of effective size D10тАЛ.
Remember that D10тАЛ is also known as the Hazen's effective size; it is the most critical parameter in estimating the permeability of granular soils.