Join 60,000+ competitive exam aspirants
The soil component with particles passing through 4.75 mm IS sieve but retained on 75 micron IS sieve, is known as _______.
cobble
sand
mud
residue
sand
According to the Indian Standard Classification System (ISCS), soil particles are categorized based on their size. Particles that pass through a 4.75 mm IS sieve and are retained on a 75 micron (0.075 mm) IS sieve are classified as sand.
IS 1498:1970
According to the Indian Standard Classification System (ISCS), soil particles are categorized based on their size. Particles that pass through a 4.75 mm IS sieve and are retained on a 75 micron (0.075 mm) IS sieve are classified as sand.
Effective┬аSize┬а(D10тАЛ)=Diameter┬аat┬аwhich┬а10%┬аof┬аsoil┬аpasses
Coefficient┬аof┬аUniformity┬а(CuтАЛ)=D10тАЛD60тАЛтАЛ
The soil classification is determined by grain-size analysis, often involving sieve analysis. The mechanical separation of particles using standardized sieves allows for the distribution curve, where the range between 4.75 mm and 75 microns constitutes the sandy fraction of the soil matrix.
Particles > 4.75 mm are termed gravel.
Particles < 0.075 mm are classified as fine-grained (silt or clay).
Sand is further subdivided into coarse (4.75 mm - 2.0 mm), medium (2.0 mm - 0.425 mm), and fine (0.425 mm - 0.075 mm) fractions.
The 75 micron sieve is the standard boundary between coarse-grained and fine-grained soils.
Provides a standardized nomenclature for engineering projects.
Helps in predicting permeability and shear strength characteristics.
Does not account for mineralogical composition or plasticity.
Grain size distribution alone is insufficient for classifying cohesive soils.
Foundation engineering and bearing capacity estimation.
Selection of construction materials for earthen dams and roads.
Option A (cobble) refers to particles between 80 mm and 300 mm.
Mud is a colloquial term for a mixture of soil and water and is not a formal geotechnical classification.
Residue is a geological term describing weathered soil in-situ and is not a particle size category.
B is correct тАФ particles ranging from 4.75 mm to 0.075 mm are officially categorized as sand in geotechnical engineering.
Remember that 75 microns is the critical 'cutoff' sieve; particles smaller than this require hydrometer analysis for size distribution, whereas larger particles are determined by mechanical sieving.