Join 60,000+ competitive exam aspirants
In a sinusoidal wave, average current is always _______ rms current.
Greater than
Less than
Equal to
Not related
Less than
For a sinusoidal waveform, the average value is defined as the arithmetic mean of the absolute values over a half-cycle, while the RMS (Root Mean Square) value is the effective value related to the energy dissipated. The RMS value is mathematically greater than the average value because it accounts for the square of the instantaneous magnitudes.
For a sinusoidal waveform, the average value is defined as the arithmetic mean of the absolute values over a half-cycle, while the RMS (Root Mean Square) value is the effective value related to the energy dissipated. The RMS value is mathematically greater than the average value because it accounts for the square of the instantaneous magnitudes.
IavgтАЛ=╧А2ImтАЛтАЛтЙИ0.637ImтАЛ
IrmsтАЛ=2тАЛImтАЛтАЛтЙИ0.707ImтАЛ
Form┬аFactor=IavgтАЛIrmsтАЛтАЛ=0.6370.707тАЛтЙИ1.11
The average value of a sine wave ImтАЛsin(╬╕) over a half-cycle is ╧А2ImтАЛтАЛтЙИ0.637ImтАЛ. The RMS value is calculated as the square root of the mean of squares, resulting in 2тАЛImтАЛтАЛтЙИ0.707ImтАЛ. Since 0.707>0.637, the RMS current is inherently higher than the average current for pure sinusoidal signals.
Average value of a full cycle for a symmetrical sine wave is zero.
Average value calculation always considers the absolute (rectified) area.
Form factor of 1.11 is a characteristic constant for sinusoidal waveforms.
RMS value is used for power calculations as it equates to DC heating effect.
RMS provides a direct measure of energy conversion.
Average value is useful in rectifier design and instrumentation.
Calculations differ significantly for non-sinusoidal waveforms.
Average value is insufficient for power-related analysis.
AC motor power ratings
Measuring instrument calibration
Transformer design
| Feature | Average Current | RMS Current |
|---|---|---|
Value Factor | 0.637 | 0.707 |
The Form Factor (FF) is defined as FF=AverageRMSтАЛ. For any sine wave, FF=1.11, meaning RMS=1.11├ЧAverage.
Option A is incorrect because average is always less than RMS for sinusoidal quantities.
Option C is incorrect as the values are distinct by a ratio of 1.11.
B is correct тАФ The RMS value is 0.707ImтАЛ and the average value is 0.637ImтАЛ, making the average value mathematically less than the RMS value.
Remember the Form Factor 1.11 for exams; it helps quickly identify the relationship between RMS and average values for sine waves.