Join 60,000+ competitive exam aspirants
In a transformer, the coils of primary and secondary are placed concentrically to achieve
reduced leakage flux between the primary and secondary winding
reduced copper losses in the windings
reduced insulation cost of the windings
reduced voltage per turn in the winding
reduced leakage flux between the primary and secondary winding
Concentric winding arrangement in a transformer is used to minimize leakage flux by ensuring that the primary and secondary windings are placed in close proximity to the same magnetic path. This configuration forces the majority of the magnetic flux to link both windings simultaneously, thereby maximizing the coupling coefficient.
Concentric winding arrangement in a transformer is used to minimize leakage flux by ensuring that the primary and secondary windings are placed in close proximity to the same magnetic path. This configuration forces the majority of the magnetic flux to link both windings simultaneously, thereby maximizing the coupling coefficient.
LlтАЛ=N2PlтАЛ тАФ represents the leakage inductance where PlтАЛ is the permeance of the leakage path
kтЙИ1тИТLmтАЛLlтАЛтАЛ тАФ represents the coupling coefficient where LmтАЛ is the mutual inductance
In a shell-type or core-type transformer, leakage flux is the portion of magnetic flux that does not link both windings. By layering the low-voltage (LV) winding close to the core and the high-voltage (HV) winding directly over the LV winding (concentric arrangement), the physical distance between them is minimized. This reduction in the reluctance path of the common flux relative to the leakage paths effectively decreases the leakage inductance LlтАЛ.
Minimizing leakage flux improves the transformer's voltage regulation.
Concentric windings are standard in most modern core-type power transformers.
The low-voltage winding is typically placed closer to the core to simplify insulation requirements.
High leakage flux leads to a high reactive voltage drop under load.
Improved voltage regulation
Increased magnetic coupling efficiency
Reduced electromagnetic interference
Higher complexity in manufacturing
Requires robust insulation between concentric layers
Distribution transformers
Power transformers
High-frequency isolation transformers
Option B is incorrect because copper losses (I2R) depend primarily on winding resistance, not the proximity of the windings.
Option C is incorrect as concentric windings often require thicker insulation layers between the HV and LV sections compared to sandwich windings.
Option D is incorrect because voltage per turn is determined solely by the core flux and supply frequency (dtdVтАЛ=Ndtd╬жтАЛ).
A is correct тАФ Concentric placement minimizes the physical distance and reluctance between windings, thereby reducing leakage flux and improving magnetic coupling.
Always remember that high leakage flux increases the internal impedance (ZeqтАЛ=ReqтАЛ+jXeqтАЛ) of the transformer, leading to poor voltage regulation.