Join 60,000+ competitive exam aspirants
In a transmission line, distributed constants are
Resistance, inductance
Resistance, capacitance
Resistance, inductance, capacitance
None of above
Resistance, inductance, capacitance
A transmission line is characterized by four primary distributed parameters: Resistance (R), Inductance (L), Conductance (G), and Capacitance (C). These parameters are distributed uniformly along the entire length of the line, distinguishing transmission lines from lumped-element circuits.
A transmission line is characterized by four primary distributed parameters: Resistance (R), Inductance (L), Conductance (G), and Capacitance (C). These parameters are distributed uniformly along the entire length of the line, distinguishing transmission lines from lumped-element circuits.
Z0тАЛ=G+j╧ЙCR+j╧ЙLтАЛтАЛ тАФ Characteristic Impedance
╬│=(R+j╧ЙL)(G+j╧ЙC)тАЛ тАФ Propagation Constant
The distributed nature occurs because current flowing through a conductor encounters inherent ohmic resistance (R) and creates a magnetic field surrounding it, resulting in series inductance (L). Simultaneously, the potential difference between conductors creates an electric field, leading to shunt capacitance (C) and leakage conductance (G) across the insulation. Because these effects are spread across the line's geometry, they must be represented as differential elements per unit length.
Resistance (R) arises from the resistivity and cross-section of the conductor material.
Inductance (L) results from the magnetic flux linkage surrounding the conductors.
Capacitance (C) arises from the potential difference between conductors separated by a dielectric medium.
Conductance (G) represents the leakage current through the insulation, often neglected for ideal overhead lines.
Accurate prediction of wave propagation and signal attenuation.
Enables calculation of reflections and impedance matching in high-frequency circuits.
Increased complexity in modeling compared to lumped parameter approximations.
Calculations require solving complex partial differential equations (Telegrapher's equations).
Power system analysis for long-distance transmission.
RF and Microwave circuit design (coaxial cables, microstrips).
Conductance (G) is typically ignored for power transmission lines due to high-quality insulation, but it is critical in telecommunication cables.
For short lines, lumped parameter models (T or Pi networks) are sufficient, but distributed models are mandatory for long lines where length exceeds a significant fraction of the wavelength.
C is correct тАФ A transmission line's electrical behavior is defined by its distributed parameters R, L, C, and G, which are defined per unit length.
Always remember that while R, L, and C are explicitly listed in the options, G (shunt conductance) is the fourth fundamental distributed constant often included in the full telegrapher's model.