Join 60,000+ competitive exam aspirants
Skin effect is more pronounced at
High frequency
Low frequency
Cut-off frequency
Half power frequency
High frequency
Skin effect is the tendency of an alternating electric current to become distributed within a conductor such that the current density is highest near the surface and decreases exponentially towards the center. This phenomenon becomes more pronounced at higher frequencies due to the increased inductive reactance at the conductor's core.
Skin effect is the tendency of an alternating electric current to become distributed within a conductor such that the current density is highest near the surface and decreases exponentially towards the center. This phenomenon becomes more pronounced at higher frequencies due to the increased inductive reactance at the conductor's core.
╬┤=╧Аf╬╝╧ГтАЛ1тАЛ тАФ where ╬┤ is the skin depth, f is frequency, ╬╝ is permeability, and ╧Г is conductivity.
RacтАЛ>RdcтАЛ тАФ indicating the increase in effective resistance due to skin effect.
When alternating current flows through a conductor, the magnetic flux linkages inside the conductor are higher at the center than at the surface. This results in higher self-inductance at the core, causing higher inductive reactance (XLтАЛ=2╧АfL) at the center compared to the surface. Consequently, the AC current faces more impedance at the center and is forced to flow through the outer layers (the 'skin'), reducing the effective cross-sectional area of the conductor.
Skin effect increases the effective AC resistance of the conductor.
It is independent of the conductor's shape but depends on frequency, permeability, and conductivity.
For DC current (f=0), the current distribution is uniform.
ACSR (Aluminum Conductor Steel Reinforced) is used in transmission lines to utilize the cross-section effectively.
Useful in high-frequency induction heating applications.
Helps in reducing the effective internal inductance of conductors.
Increases I2R power losses in transmission lines.
Reduces the effective utilization of the conductor material cross-section.
High-frequency radio and microwave communications.
Induction heating and hardening of metals.
At 50 Hz (Power frequency), skin effect is relatively small for copper/aluminum conductors but becomes significant for very large cross-section conductors.
Option B (Low frequency) results in more uniform current distribution, approaching DC conditions.
A is correct тАФ The skin effect is directly proportional to the square root of the frequency, making it significantly more pronounced at high frequencies.
Always remember that skin effect leads to higher voltage drop and power loss in EHV transmission lines, often requiring bundles of conductors to mitigate the effective resistance.