Join 60,000+ competitive exam aspirants
In a two stage gas turbine power plant intercooling and reheating
Improves the work ratio but reduces the thermal efficiency
Reduces the work ratio but improves the thermal efficiency
Improves both the work ratio and thermal efficiency
Reduces both the work ratio and thermal efficiency
Improves the work ratio but reduces the thermal efficiency
Intercooling in the compressor and reheating in the turbine are techniques used to increase the specific work output of a gas turbine plant. However, because these processes require external heat addition (reheat) and remove heat from the cycle (intercool), they generally decrease the overall thermal efficiency if the turbine inlet temperature is not sufficiently increased.
Intercooling in the compressor and reheating in the turbine are techniques used to increase the specific work output of a gas turbine plant. However, because these processes require external heat addition (reheat) and remove heat from the cycle (intercool), they generally decrease the overall thermal efficiency if the turbine inlet temperature is not sufficiently increased.
WnetтАЛ=WTтАЛтИТWCтАЛ
╬╖thтАЛ=QinтАЛWnetтАЛтАЛ
Intercooling reduces the compressor work required by bringing the gas closer to an isothermal process, while reheating increases the turbine output by expanding the gas over a larger volume. The net work is defined as WnetтАЛ=WturbineтАЛтИТWcompressorтАЛ. While WnetтАЛ increases, the heat input QinтАЛ increases significantly due to the reheat cycle, leading to a decrease in efficiency defined by ╬╖=QinтАЛWnetтАЛтАЛ.
Intercooling reduces the specific volume of air entering the compressor, decreasing the compressor work.
Reheating increases the temperature of the gas after the first turbine stage, increasing total turbine work.
The Work Ratio is defined as the net work output divided by the total turbine work output.
In industrial gas turbines, these are often used alongside regeneration to recover lost thermal efficiency.
Increased power-to-weight ratio
Improved specific power output
Better control over turbine blade temperatures
Decrease in thermal efficiency
Increased complexity and capital cost
Additional heat exchangers required
Large-scale aircraft engines
Industrial combined-cycle power plants
Marine propulsion systems
Option B is incorrect as work ratio is improved, not reduced.
Option C is incorrect because while work ratio improves, thermal efficiency decreases in the absence of a regenerator.
Standard industrial practice often combines these with a regenerator to negate the efficiency loss.
A is correct тАФ The addition of intercooling and reheating improves the specific work output (Work Ratio) but simultaneously decreases the cycle's overall thermal efficiency due to higher heat input requirements.
Always remember that 'Work Ratio' is about mass-energy throughput, while 'Thermal Efficiency' is strictly about the fuel-to-work conversion ratio.