Join 60,000+ competitive exam aspirants
In a two stages gas turbine plant reheating after first stage
Improves thermal efficiency but reduces the work ratio
Increase work ratio but reduces thermal efficiency
Reduces both of the work ratio and thermal efficiency
Increases both of the work ratio and thermal efficiency
Increase work ratio but reduces thermal efficiency
Reheating in a gas turbine cycle is employed to increase the total work output by keeping the turbine exit temperature high, which effectively increases the mean temperature of heat addition. While this significantly increases the turbine work outputтАФand thus the work ratioтАФit requires additional fuel input, which often results in a decrease in the overall thermal efficiency of the cycle unless combined with regeneration.
Reheating in a gas turbine cycle is employed to increase the total work output by keeping the turbine exit temperature high, which effectively increases the mean temperature of heat addition. While this significantly increases the turbine work outputтАФand thus the work ratioтАФit requires additional fuel input, which often results in a decrease in the overall thermal efficiency of the cycle unless combined with regeneration.
WR=WturbineтАЛWnetтАЛтАЛ тАФ Definition of work ratio
╬╖=QinтАЛWnetтАЛтАЛ тАФ Definition of thermal efficiency
In a Brayton cycle with reheat, the expansion process is split into two stages. The exhaust gas from the first stage is reheated at constant pressure before entering the second stage. This increases the total turbine work (WTтАЛ=WT1тАЛ+WT2тАЛ). The work ratio, defined as the ratio of net work output to turbine work output, increases because the gain in turbine work outweighs the slight increase in compressor input. However, since the heat supplied increases significantly, the cycle thermal efficiency (╬╖=QinтАЛWnetтАЛтАЛ) typically drops compared to an ideal simple cycle without regeneration.
Reheating increases the total turbine output.
Work ratio is the ratio of net work to gross turbine work.
Thermal efficiency decreases because the increase in heat addition exceeds the increase in net work.
Reheat is often used in conjunction with intercooling and regeneration to recover efficiency.
Increased power density/output for a given size
Higher turbine exhaust temperature
Improved work ratio
Reduction in thermal efficiency
Complexity of plant design
Increased fuel consumption
Large-scale combined cycle power plants
Marine propulsion turbines
| Feature | Work Ratio | Thermal Efficiency |
|---|---|---|
Impact of Reheat | Increase | Decrease |
Note: The reduction in thermal efficiency occurs because the heat addition occurs at a lower average temperature compared to a single-stage cycle without regeneration.
The work ratio improves because the turbine work increases significantly, making the compressor work represent a smaller fraction of the output.
B is correct тАФ Reheating in a gas turbine cycle increases the turbine work output, which raises the work ratio, but the additional fuel required for reheating lowers the overall thermal efficiency.
Always remember that in thermodynamics, 'efficiency' and 'work ratio' do not always move in the same direction; check the heat addition per unit of work produced.