Join 60,000+ competitive exam aspirants
The combined cycle power plants are more appropriate for capacity factors of
Less than 20%
20 to 50%
50 to 70%
100%
20 to 50%
Combined cycle power plants (CCPP) utilize both gas turbine and steam turbine cycles to achieve high thermal efficiency. They are economically optimal for mid-range (intermediate) capacity factors, typically between 20% and 50%, as they bridge the gap between peaking plants (low capacity factor) and base-load plants (high capacity factor).
Combined cycle power plants (CCPP) utilize both gas turbine and steam turbine cycles to achieve high thermal efficiency. They are economically optimal for mid-range (intermediate) capacity factors, typically between 20% and 50%, as they bridge the gap between peaking plants (low capacity factor) and base-load plants (high capacity factor).
╬╖combinedтАЛ=╬╖gasтАЛ+╬╖steamтАЛтИТ╬╖gasтАЛтЛЕ╬╖steamтАЛ тАФ Overall efficiency of the combined cycle
CF=PmaxтАЛтЛЕ8760EactualтАЛтАЛ тАФ Capacity factor calculation where E is annual generation in MWh
The principle involves the Brayton cycle (gas turbine) followed by the Rankine cycle (steam turbine) through a Heat Recovery Steam Generator (HRSG). The high-temperature exhaust gas from the gas turbine is used to generate steam for the steam turbine, significantly increasing overall plant efficiency beyond the Carnot limit of a single cycle. Because of their fast start-up capability compared to coal plants but higher capital cost compared to simple open-cycle gas turbines, they are best suited for intermediate duty cycles.
Combined cycle plants offer higher thermal efficiency (up to 60%) compared to conventional coal-fired plants.
They are highly responsive to changes in demand, making them ideal for load following.
Lower carbon footprint due to natural gas as the primary fuel source compared to coal.
Intermediate usage allows utilities to balance grid demand effectively without the slow ramp-up times of base-load coal units.
High overall fuel efficiency
Short construction period
Lower water consumption compared to pure steam plants
Rapid startup and shutdown capability
Dependency on natural gas fuel prices
High maintenance complexity
Not suited for long-term continuous base load at extreme efficiency levels like large super-critical thermal plants
Grid frequency regulation
Intermediate/Mid-merit load balancing
Industrial cogeneration facilities
Peaking plants (capacity factor < 20%) are usually simple-cycle gas turbines due to lower capital cost.
Base-load plants (capacity factor > 60-70%) are usually coal or nuclear plants where operating costs are very low.
B is correct тАФ Combined cycle power plants are best utilized in the 20 to 50% capacity factor range to balance high efficiency with flexible operational needs.
Always remember the hierarchy: Open Cycle Gas (Peaking) < Combined Cycle (Intermediate) < Coal/Nuclear (Base Load) based on merit order dispatch.