Join 60,000+ competitive exam aspirants
In boiler water reactor (BWR)
Feed water acts both coolant and a moderator
Enriched uranium is used as fuel
There is a danger of radio-active contamination of steam
All of above
All of above
A Boiling Water Reactor (BWR) is a type of light water nuclear reactor where water is allowed to boil inside the reactor pressure vessel to produce steam, which then drives the turbine directly. All the listed statements are correct characteristics of this reactor design.
A Boiling Water Reactor (BWR) is a type of light water nuclear reactor where water is allowed to boil inside the reactor pressure vessel to produce steam, which then drives the turbine directly. All the listed statements are correct characteristics of this reactor design.
E=mc2 тАФ Einstein's mass-energy equivalence principle governing nuclear energy release
╬╖thermalтАЛ=QinтАЛWтАЛ тАФ Fundamental thermal efficiency relation
In a BWR, light water serves both as a coolant to remove heat from the fuel rods and as a moderator to slow down fast neutrons to thermal energies. Because the water directly contacts the fuel and boils into steam within the vessel, the steam is radioactive, which requires shielding and remote operation for downstream components.
Light water acts as both the moderator (to slow neutrons) and coolant (to carry away heat).
Uses U235 enriched fuel to maintain a self-sustaining chain reaction.
Single-cycle system design results in radioactive steam entering the turbine directly.
Control rods are inserted from the bottom of the vessel to control reactivity.
Simplified plant design (no secondary loop or heat exchangers needed).
Operates at lower pressure than Pressurized Water Reactors (PWR).
Avoids potential corrosion issues associated with secondary loops.
Radioactive steam contamination requires extensive turbine shielding.
Complex maintenance due to radioactive components.
Lower power density compared to PWRs.
Large-scale base load power generation.
Used in many national grid electrical distribution networks.
Enriched uranium typically contains 3-5% U235.
The BWR design is favored in countries like Japan and the USA for specific economic and safety trade-offs.
D is correct тАФ The BWR utilizes light water as both moderator and coolant, requires enriched uranium fuel, and produces radioactive steam, making all the provided statements accurate.
Always recall that in a BWR, the 'Boiling' happens in the core, whereas in a PWR, the 'Pressurization' keeps water in a liquid state to prevent boiling in the core.