Join 60,000+ competitive exam aspirants
In a nuclear power station using boiler water reactor (BWR), water is used as
Moderator but not as coolant
Coolant but not as moderator
Both moderator and coolant
Neither moderator nor coolant
Both moderator and coolant
In a Boiling Water Reactor (BWR), light water serves the dual purpose of acting as a neutron moderator to thermalize fast neutrons and as a coolant to remove heat generated from the fuel rods. The heat removed by the coolant causes it to boil directly within the reactor vessel, creating steam that drives the turbine.
In a Boiling Water Reactor (BWR), light water serves the dual purpose of acting as a neutron moderator to thermalize fast neutrons and as a coolant to remove heat generated from the fuel rods. The heat removed by the coolant causes it to boil directly within the reactor vessel, creating steam that drives the turbine.
EthermalтАЛ=21тАЛmv2 тАФ Thermalization process where moderator reduces neutron kinetic energy
╬ФQ=mc╬ФT тАФ Heat transfer process where coolant carries energy to steam
Nuclear fission produces high-energy (fast) neutrons that are ineffective at sustaining a chain reaction; the water acts as a moderator by colliding with these neutrons, slowing them down to thermal energy levels. Simultaneously, the water circulates through the reactor core, absorbing the thermal energy released by fission to transition into steam for electricity generation.
Light water is highly effective at moderation due to the high density of hydrogen atoms which match the neutron mass.
BWRs are designed to operate at pressures where phase change (boiling) occurs directly in the core.
Using a single fluid for both roles simplifies the system design and reduces cost.
Simplified plant design due to absence of steam generators
Lower operating pressure compared to Pressurized Water Reactors (PWR)
Radioactive steam directly contacts the turbine components
Complexity in controlling reactor power via recirculation flow
Commercial nuclear power generation
Base-load electricity grids
In a Pressurized Water Reactor (PWR), water is also both a coolant and moderator, but it is kept under such high pressure that it does not boil in the reactor vessel.
Option A is incorrect because water is the most common coolant in light water reactors.
Option B is incorrect because water is a light element and a highly efficient neutron moderator.
C is correct тАФ In a Boiling Water Reactor, water acts as a moderator to sustain the chain reaction and as a coolant to extract thermal energy from the fuel.
Always recall that BWR and PWR systems both use water as a moderator and coolant; the primary difference is whether the boiling happens inside the reactor vessel (BWR) or a separate steam generator (PWR).