Join 60,000+ competitive exam aspirants
Tarapur atomic power station has
CANDU type reactors
Boiling water reactors
Pressurized water reactors
Gas cooled reactors
Boiling water reactors
The Tarapur Atomic Power Station (TAPS), located in Maharashtra, is India's first commercial nuclear power plant. It utilizes Boiling Water Reactors (BWRs) for electricity generation, commissioned in 1969 with the assistance of the United States.
The Tarapur Atomic Power Station (TAPS), located in Maharashtra, is India's first commercial nuclear power plant. It utilizes Boiling Water Reactors (BWRs) for electricity generation, commissioned in 1969 with the assistance of the United States.
P=╬╖тЛЕm╦ЩтЛЕ╬Фh тАФ Electrical power output related to enthalpy change and mass flow rate
╬╖=QinтАЛWoutтАЛтАЛ тАФ Thermal efficiency of the nuclear cycle
In a Boiling Water Reactor, water circulates through the reactor core where it is heated by nuclear fission. The steam produced directly drives the turbine connected to a generator, bypassing the need for a secondary heat exchanger or steam generator. The process is characterized by a single loop where the primary coolant is also the working fluid.
Tarapur TAPS-1 and TAPS-2 are the BWR units.
TAPS-3 and TAPS-4 are PHWR (Pressurized Heavy Water Reactor) units.
BWRs use light water as both moderator and coolant.
TAPS was the first nuclear power project in India.
Simplified plant design due to lack of steam generators.
Lower operating pressure compared to PWRs.
High efficiency due to direct steam cycle.
Turbine becomes radioactive due to direct exposure to reactor coolant.
Higher risk of radioactive contamination in the turbine hall.
Complex water chemistry management.
Base load electricity generation.
Grid stabilization in western India.
| Feature | BWR | PHWR |
|---|---|---|
Coolant | Light Water | Heavy Water |
Steam Source | Direct from Reactor | Steam Generator |
Commissioned in 1969, TAPS marked the beginning of India's nuclear energy program.
Option C (PWR) is a common alternative design where the primary and secondary water circuits are isolated.
B is correct тАФ Tarapur Atomic Power Station uses Boiling Water Reactors (BWR) for its original units (TAPS-1 and 2).
Always distinguish between TAPS-1/2 (BWR) and TAPS-3/4 (PHWR) as exam questions often test the specific technology installed at different stages of Indian power projects.