Join 60,000+ competitive exam aspirants
In comparison to diesel engines the gas turbines have maximum combustion pressure
Less
Same
More
Unpredictable
Less
Gas turbines operate on the Brayton cycle, which involves a continuous flow process with relatively low pressure ratios compared to the high-compression ignition process in diesel engines. Diesel engines, relying on compression ignition, require much higher peak combustion pressures to reach the auto-ignition temperature of the fuel, whereas gas turbines use a continuous combustion process at a controlled, lower pressure.
Gas turbines operate on the Brayton cycle, which involves a continuous flow process with relatively low pressure ratios compared to the high-compression ignition process in diesel engines. Diesel engines, relying on compression ignition, require much higher peak combustion pressures to reach the auto-ignition temperature of the fuel, whereas gas turbines use a continuous combustion process at a controlled, lower pressure.
Pmax,dieselтАЛтЙлPmax,turbineтАЛ тАФ Relationship of peak pressures
rpтАЛ=PinтАЛPoutтАЛтАЛ тАФ Pressure ratio characteristic
In a diesel engine, the piston compresses air to a high degree (rcтАЛ=14тИТ22), causing the peak pressure (PmaxтАЛ) to reach approximately 60-100 bar during the power stroke. Conversely, gas turbines typically operate with pressure ratios between 10:1 and 40:1, and because the combustion chamber is a constant-pressure (isobaric) heat addition device, the internal pressure remains significantly lower than the extreme peak pressures found in reciprocating diesel cylinders.
Diesel engines operate on the Diesel or Dual combustion cycle (high peak pressure).
Gas turbines operate on the Brayton cycle (constant pressure heat addition).
High pressure in diesel is essential for the self-ignition of fuel.
Gas turbines prioritize mass flow and high turbine inlet temperatures rather than extreme combustion pressures.
Gas turbines have a higher power-to-weight ratio.
Lower internal mechanical stress compared to high-compression reciprocating engines.
Gas turbines require expensive high-temperature alloys.
Diesel engines maintain higher thermal efficiency at part-load.
Diesel: Heavy transport, marine, and backup power.
Gas Turbine: Aviation and large-scale power generation.
| Feature | Diesel Engine | Gas Turbine |
|---|---|---|
Peak Combustion Pressure | Very High (60-100 bar) | Moderate (10-30 bar) |
The peak pressure in a gas turbine is limited by the compressor's capability and material strength at turbine inlet temperatures.
Option B and C are incorrect because the mechanical design and thermodynamic cycles of these two machines are fundamentally distinct in pressure handling.
A is correct тАФ Gas turbines operate at lower peak combustion pressures than diesel engines because they rely on continuous combustion rather than the extreme compression ignition required in reciprocating diesel engines.
Always remember that reciprocating engines (IC engines) generally have higher peak pressures than rotary engines (turbines) due to the nature of constant-volume or mixed-pressure combustion cycles.