Join 60,000+ competitive exam aspirants
For starting gas turbine, its rotor is usually motored upto
10% of turbine rated speed
25% of turbine rated speed
Half of turbine rated speed
Turbine rated speed
Half of turbine rated speed
To start a gas turbine, the rotor must be accelerated by an external starter motor to a specific percentage of its rated speed, typically 40% to 50%, to ensure sufficient airflow for combustion. At this speed, the turbine develops enough compressor pressure to maintain stable combustion, after which the starter is disengaged.
To start a gas turbine, the rotor must be accelerated by an external starter motor to a specific percentage of its rated speed, typically 40% to 50%, to ensure sufficient airflow for combustion. At this speed, the turbine develops enough compressor pressure to maintain stable combustion, after which the starter is disengaged.
NstartтАЛтЙИ0.5├ЧNratedтАЛ тАФ Typical starter disengagement speed criteria
PinтАЛтИЭ╧БAv3 тАФ Relationship between air velocity and power availability during start
The gas turbine is not self-starting at zero speed because the air-fuel mixture requires high-pressure air for ignition and sustained burning. A starter motor (electric motor, diesel engine, or compressed air turbine) accelerates the compressor-turbine shaft. Once the rotor reaches approximately half of its rated speed, the air flow rate and pressure are high enough to support self-sustaining combustion in the combustion chamber, allowing the turbine to produce sufficient torque to accelerate to full speed.
Gas turbines require an external starting device because they lack self-starting capability at zero RPM.
The starter motor accelerates the compressor to establish enough mass flow for the ignition process.
At 50% speed, the compressor produces sufficient pressure to support a self-sustaining flame in the combustion chamber.
Once self-sustained, the turbine power exceeds the load, and the starter is automatically disconnected.
Prevents thermal damage to turbine blades during light-off
Ensures stable air-fuel ratios during ignition
Requires high-capacity auxiliary starting motors
Increased complexity in mechanical drive coupling
Power Generation (GTCC plants)
Jet Engine Propulsion
Industrial Gas Turbine Start-up sequences
The 50% speed threshold is standard for most industrial heavy-duty gas turbines.
Option A and B represent speeds insufficient for creating the necessary compression ratios required to sustain combustion.
C is correct тАФ The rotor is motored up to approximately 50% of its rated speed to establish sufficient airflow for stable combustion.
Always remember that unlike steam turbines, gas turbines have a 'minimum self-sustaining speed' requirement; in competitive exams, this is almost always cited as 50% of rated speed.